جمعه، 10 فروردین 1403 تماس با ما نقشه سایت صفحه اصلی English
 
 

 
 
     

رضا یگانی
مرتبه علمی :استاد
تخصص :
زمینه های تحقیقاتی :  مهندسی بیو‌فرآیند  غشاهای پلیمری  فرآیندهای بیولوژیکی  تصفیه آب و فاضلاب
مراکز تحقیقاتی :Membrane Technology Research Center

پست الکترونیکی: ryegani@sut.ac.ir
شماره تلفن: 00984133459147
شماره فکس: 00984133444355
رزومه:

رضایگانی، دکتری مهندسی شیمی،
آدرس محل کار: تبریز، شهر جدید سهند، پردیس دانشگاه صنعتی سهند،
دانشکده مهندسی شیمی، تلفن: 041-33459147، نمابر: 041-33444355و
الف: مدارک تحصیلی

 

  • دکتری مهندسی شیمی، دانشگاه ملی کوبه، ژاپن، 1384-1381(دریافت  بورسیه مونبوکاگاگوشوMONBUGAKAGUSHO  ویژه دانشجویان ممتاز، وزارت علوم و فرهنگ دولت ژاپن) 1384
  • کارشناسی ارشد مهندسی شیمی، دانشگاه صنعتی امیر کبیر، فارغ التحصیل ممتاز دانشکده  1378-1375
  • کارشناسی مهندسی شیمی دانشگاه صنعتی سهند تبریز، رتبه اول دانشکده  1375-1370

 
ب: سوابق شغلی

  • استاد مهندسی شیمی، دانشکده مهندسی شیمی، دانشگاه صنعتی سهند، بهمن 1395 تا کنون
  • دانشیار مهندسی شیمی، دانشکده مهندسی شیمی، دانشگاه صنعتی سهند، مهر 1392 تا بهمن 1395
  • استادیار مهندسی شیمی، دانشکده مهندسی شیمی، دانشگاه صنعتی سهند، فروردین 1387-مهر 1392
  • مدیر تولید آنتی بیوتیک های تزریقی، داروسازی دانا (زکریای سابق) 1378-1381

 
پ: سوابق اجرایی، صنعتی و تخصصی:

  • مشاورعالی شرکت پتروشیمی رازی بندر امام، طرح کلان جمع آوری فاضلاب، تصفیه فاضلاب، بازچرخانی و استفاده مجدد از آب، 1398 تا کنون
  • مشاور عالی و ناظر نصب و بهره برداری سیستم تصفیه آب و فاضلاب، سیستم های گلخانه هیدروپونیک
  • عضو تخصصی کمیته فناوری "پروژه ملی تدوین سند و نقشه راه نمک زدایی کشور"، وزرات نیرو 1395-1397
  • عضو تخصصی دفتر پایش و برنامه ریزی دانشگاه تبریز؛ دبیرکارگروه آب و پساب، ستاد احیا دریاچه ارومیه 1396-1398

 
 
ت: تخصص ها، مدارک فنی و دوره های تخصصی

  • متخصص فناوری بیوراکتورهای غشایی در تصفیه و بازچرخانی فاضلاب های شهری و صنعتی و منابع غیر متعارف، تعمیر، نگهداری، نصب، راه اندازی  سیستم های بیوراکتورهای غشایی با گواهی نامه رسمی شرکت ASAHI KASEI  ژاپن، 1395
  • فرصت مطالعاتی تحقیقاتی، JASSO Japan، مرکز تحقیقات ملی غشا دانشگاه کوبه، ژاپن با همکاری شرکت TORAY در زمینه فناوری های نوین تصفیه آب و فاضلاب با استفاده از بیوراکتور های غشایی 1393
  • محقق دوره پسا دکتری، مرکز تحقیقات ملی فناوری غشا در زمینه تصفیه آب، دانشگاه کوبه، ژاپن، 1387-1384
  • متخصص عملیات واحد های استریل و فیلتراسیون غشایی آنتی بیوتیک های تزریقی و طی دوره های تخصصی آموزشی و پژوهشی و اپراتوری در شرکت Jeil Jedang,،  سئول ،کره جنوبی. 1380-1381

 
ث: اختراعات ثبت شده دارای تاییدیه علمی از بنیاد نخبگان و سازمان پژوهش های علمی و صنعتی کشور
 
پتنت های ذیل در خصوص ساخت غشاهای تخت و هالوفایبر با استفاده از مواد اولیه پلی اتیلن و پلی پروپیلن تولیدی داخل کشور (پتروشیمی اراک و تبریز) با فناوری بومی سازی شده القا حرارتی(TIPS)  برای اولین بار و بطور کاملا انحصاری در کشور است. مهمترین کاربرد این غشاها در فناوری تصفیه و بازیافت آب می باشد که در داخل کشور هیچ نمونه مشابهی برای آنها موجود نمی باشد. 
 

  • US Patent: US Patent: 8377170 B2, Date of Patent: Feb. 19, 2013
  • US Patent: US Patent: 8617297 B2, Date of Patent: Dec. 31, 2013
  • دستگاه ساخت غشاهای پلیمری الیاف نازک توخالی(هالوفایبر) با روش القا حرارتیTIPS  73997 (3/12/1390).
  • طراحی و ساخت قالب های شکل دهنده (اسپینیریت) های غشاهای الیاف نازک توخالی (هالوفایبر)، 75998 (26/4/1391).
  • ساخت غشاهای پلی پروپیلنی فوق آبگریز تخت ریز متخلخل با سنتز درجای نانو ذرات سیلیکای اصلاح شده با عامل فلوئور دار ساخته شده به روش جدایش فازی با القای حرارتی (TIPS) 82099(28/11/1392).
  • ساخت غشاهای الیاف نازک توخالی پلی پروپیلنی به روش القا حرارتی- شماره ثبت 80425-1392
  • طراحی و ساخت فتوبیوراکتور غشایی الیاف نازک توخالی به منظور کشت میکروارگانیسم های فتوسنتز کننده-شماره ثبت 81919-1392
  • ساخت غشاهای زمینه مختلط میکرو متخلخل تخت به روش القا حرارتی(ZeoTIPS)  شماره ثبت 81760 -1392
  • طراحی و ساخت بیوراکتور غشایی با غشاهای تخت پلی الفینی-شماره ثبت 82264-1393
  • ساخت سیستم های بیوراکتور غشایی با انعطاف پذیری بالا در تصفیه فاضلاب- شماره ثبت 85902-1394
  • سنتز نانو ذرات سیلیکایی پیوند زنی شده با پلی اتیلن گلیکول با جذب پایین پروتئین بمنظور استفاده در ساخت غشا نانوکامپوزیتی پلی اتیلنی با حداقل گرفتگی در فرایند تصفیه اب- اظهارنامه 139450140003002778
  • ساخت غشاهای الیاف نازک توخالی(هالوفایبر) پلی اتیلن سبک خطی به روش القای حرارتی بمنظور استفاده در فرایند تصفیه اب-اظهارنامه139450140003003408

 
ج: طرح های پژوهشی اتمام یافته
 

  • مجری طرح ملی" احداث اولین مرکز تحقیقات جامع فناوری غشا های پلیمری در کشور، بومی سازی فناوری ساخت و ارزیابی ساختاری و عملکردی غشاهای میکرو و اولترافیلتراسیون با استفاده از پلی الفین ها(پلی اتیلن و پلی پروپیلن تولیدی داخل کشور) بمنظوراستفاده در فناوری بومی سازی بیوراکتورهای غشایی در استحصال آب از منابع غیر متعارف نظیر فاضلاب های صنعتی و شهری"، با حمایت مالی شرکت ملی پالایش و پخش فرآورده های نفتی ایران 1387-1391.

این مجموعه تنها مرکز تحقیقات غشایی در داخل کشور است که علاو بر ساخت غشاهای پلی الفینی، کلیه تجهیزات و دستگاه های سازنده غشاهای پلی الفینی تخت و هالوفایبر را نیز طراحی و تولید می نماید. 

  • مجری طرح "تدوین دانش فنی تولید سوخت های تجدید پذیر بیودیزل با استفاده  از ریز جلبک ها در مقیاس آزمایشگاهی و تولید پیوسته در مقیاس پایلوت با ظرفیت تخمیری 10 لیتری با حمایت مالی طرحهای صنایع نوین سازمان گسترش و نوسازی صنایع ایران، 1389-1393.
  • مجری طرح "امکان سنجی اصلاح غشاهای تعویض یونی در افزایش بازده و میزان تولید جریان الکتریسیته با استفاده از پیل های سوختی میکروبی" با حمایت مالی دانشگاه صنعتی سهند تبریز و شرکت کلر پارس. 1387-1388.
  • مجری طرح امکان سنجی بازچرخانی و استفاده مجدد از پساب صنعتی شرکت پتروشیمی تبریز با استفاده از فناوری نوین غشایی  به شماره قرارداد 0871769609,1396.
  • مجری و همکار اصلی طرح " طراح واحد پایلوت پیشرفته ترین سیستم تصفیه فاضلاب" با حمایت مالی شرکت ملی پالایش و پخش فرآورده های نفتی ایران 1387-1391.
  • همکار اصلی طرح " تدوین دانش فنی تولید کلاژن ژل از پوست گاو به روش بیوتکنولوژی جهت ساخت بافت غضروفی مهندسی شده" با حمایت مالی طرحهای صنایع نوین سازمان گسترش و نوسازی صنایع ایران، 1389-1393.
  • مشاور ارشد شرکتRenaissance Energy Research Corporation, Osaka Japan در زمینه تدوین دانش فنی ساخت غشاهای تسهیل یافته (Facilitated Transport)، اساکا، ژاپن، 2005 الی 2008.

چ: طرح های پژوهشی در حال اجرا

 

  • مجری طرح ملی تاثر شیوع ویروس کرونا بر روی منابع و تاسیسات آب، شرکت مادرتخصصی مدیریت منابع آب کشور

 
ح: عناوین و افتخارات کسب شده

  • ارائه دهنده ایده برتر دومین دومین جشنواره ملی و نمایشگاه ایده، استارتاپ و هم‌اندیشی شرکت‌های دانش‌بنیان، آذر 1397، با طرح ساخت نی حیات بمنظور تامین آب آشامیدنی از منابع آبی آلوده
  • پژوهشگر برتر رشته شاخه فنی مهندسی دانشگاه ها و موسسات آموزش عالی استان آذربایجان شرقی، آذر 1396.
  • پژوهشگر برتر دانشکده مهندسی شیمی  دانشگاه صنعتی سهند، هفته پژوهش 1394
  • برنده عنوان طرح برگزیده "طراحی و ساخت دستگاه تولید کننده غشاهای الیاف نازک توخالی با روش القا حرارتی" دومین جشنواره ملی علم تا عمل شهریور 1390
  • برنده رتبه سوم کشوری" طراحی و ساخت اسپینیریت های شکل دهنده الیاف نازک توخالی با روش القا حرارتی" سومین جشنواره ملی دانایی خلیج فارس، اسفند 1390
  • طرح برگزیده جشنواره منطقه ای نوآوری و شکوفایی کوهساران (نمایشگاه تجاری سازی اختراعات و نوآوری های شمال غرب کشور) خرداد 1391 "طراحی وساخت تجهیزات تولید کننده غشاهای الیاف نازک توخالی"
  • طرح برگزیده پنجمین جشنواره بین المللی نوآوری و شکوفایی فجر انقلاب اسلامی، بهمن 1391 "طراحی وساخت اسپینیریت های تولید کننده هالوفایبرها "
  • پژوهشگر برتر منتخب وزارت نفت، شرکت ملی پالایش و پخش فرآورده های نفتی ایران در سال 1392

 
آدرس های بین المللی تحقیقات بنده
Scopus Author ID: 6505644654
ISI Researcher ID: I-8515-2018
ORCID: 6596-8842-0002-0000
Google Scholar Page: https://scholar.google.com/citations?user=e805QngAAAAJ&hl=en
 
خ: مقالات چاپ شده
 

  1. S Hosseinpour, M Azimian‐Kivi, Y Jafarzadeh, R Yegani, (2021), “ Pharmaceutical wastewater treatment using polypropylene membranes incorporated with carboxylated and PEG‐grafted nanodiamond in membrane bioreactor (MBR)”, Water and Environment Journal.
 
  1. H Namdar, A Akbari, R Yegani, H Roghani-Mamaqani, (2020), “Influence of aspartic acid functionalized graphene oxide presence in polyvinylchloride mixed matrix membranes on chromium removal from aqueous feed containing humic acid”, Journal of Environmental Chemical Engineering, 104685.  
 
  1. FA Oghyanous, H Etemadi, R Yegani, (2020), “The effect of sludge retention time and organic loading rate on performance and membrane fouling in membrane bioreactor”, Journal of Chemical Technology & Biotechnology.
 
  1. S Heidari, H Etemadi, R Yegani, (2020), “A comprehensive analysis of membrane fouling in microfiltration of complex linear macromolecules based on theoretical modeling and FESEM images”, Journal of Chemical Technology & Biotechnology.
 
  1. S Fallah, HR Mamaghani, R Yegani, N Hajinajaf, B Pourabbas, (2020), “Use of graphene substrates for wastewater treatment of textile industries”, Advanced Composites and Hybrid Materials 3 (2), 187-193.
 
  1. M Ahsani, H Hazrati, M Javadi, M Ulbricht, R Yegani (2020), “Preparation of antibiofouling nanocomposite PVDF/Ag-SiO2 membrane and long-term performance evaluation in the MBR system fed by real pharmaceutical wastewater”, Separation and Purification Technology, 116938.
 
  1. FA Oghyanous, H Etemadi, R Yegani (2020), “Foaming control and determination of biokinetic coefficients in membrane bioreactor system under various organic loading rate and sludge retention time”, Biochemial Engineering Journal.
 
  1. H Rafiei, M Abbasian, R Yegani, (2020), “Synthesis of well-defined poly (n-vinylpyrrolidone)/n-TiO2 nanocomposites by xanthate-mediated radical polymerization”, Iranian Polymer Journal, 1-11.
 
  1. H Etemadi, M Fonouni, R Yegani, (2019),” Investigation of antifouling properties of polypropylene/TiO2 nanocomposite membrane under different aeration rate in membrane bioreactor system”, Biotechnology Reports, e00414.
 
  1. F. Beygmohammdi, HN Kazerouni, Y Jafarzadeh, H Hazrati, R Yegani, (2019), “Preparation and characterization of PVDF/PVP-GO membranes to be used in MBR system”, Chemical Engineering Research and Design.
 
  1. S Khakpour, Y Jafarzadeh, R Yegani, (2019 in press), “Incorporation of graphene oxide/nanodiamond nanocomposite into PVC ultrafiltration membranes”, Chemical Engineering Research and Design.
 
  1. A Tizchang, Y Jafarzadeh, R Yegani, S Khakpou (2019 in press), “The effects of pristine and silanized nanodiamond on the performance of polysulfone membranes for wastewater treatment by MBR system”, Journal of Environmental Chemical Engineering. 
 
  1. Habib Etemadi, Reza Yegani (2019 in press), “Effect of aeration rate on the anti-biofouling properties of cellulose acetate nanocomposite membranes in a membrane bioreactor system for the treatment of pharmaceutical wastewater”, Biofouling, The Journal of Bioadhesion and Biofilm Research.
 
  1. MA Kivi, H Alinia, Y Jafarzadeh, R Yegani, (2019 in press), “High‐density polyethylene membranes embedded with carboxylated and polyethylene glycol‐grafted nanodiamond to be used in membrane bioreactors”, Journal of Applied Polymer Science.
 
  1. M Fonouni, H Etemadi, R Yegani, M Safary Dehnavi, N Jodeiry, (2019), “Application of wet chemical surface functionalization method in preparation of anti-fouling polysulfone microporous membrane for water treatment”, Journal of Water and Environmental Nanotechnology 4 (4), 308-320.
 
  1. P Amirabedi, A Akbari, R Yegani, (2019 in press), “Fabrication of hydrophobic PP/CH3SiO2 composite hollow fiber membrane for membrane contactor application”, Separation and Purification Technology.
 
  1.  HN Kazerouni, Y Jafarzadeh, R Yegani, (2019), “Study on the effect of m-phenylenediamine as a cross-linking agent on the mechanical, chemical and thermal properties and performance of cellulose acetate/nanodiamond membranes”, Polymer Bulletin, 1-21.
 
  1.  M Seyfollahi, H Etemadi, R Yegani, M Rabeii, E Shokri, (2019), “The effect of polyethylene glycol grafted nanodiamond on antifouling properties of cellulose acetate membrane for Removal of BSA from Contaminated Water”, Journal of Water and Environmental Nanotechnology 4 (1), 1-16.
 
 
  1.  S. Hoseinpour, Y Jafarzadeh, R Yegani, S Masoumim (2019), “Embedding neat and carboxylated nanodiamonds into polypropylene membranes to enhance antifouling properties”, Polyolefins Journal, 6 (1), 63-74
 
  1. M Javadi, Y Jafarzadeh, R Yegani, S Kazemi, (2018 in press), “PVDF membranes embedded with PVP functionalized nanodiamond for pharmaceutical wastewater treatment”, Chemical Engineering, Research and Design.
 
  1. S. Hoseinpour, Y Jafarzadeh, R Yegani, S Masoumi, (2018 in press), “Embedding neat and carboxylated nanodiamonds into polypropylene membranes to enhance antifouling properties”, Polyolefine Journal.
 
  1. F. Karamouz, H Maghsoudi, R Yegani, (2018), “Synthesis of High‐Performance Pebax®‐ 1074/DD3R Mixed‐Matrix Membranes for CO2/CH4 Separation” Chemical Engineering & Technology, 41 (9), 1767-1775.
 
  1. A,Behboudi, Y Jafarzadeh, R Yegani (2018), “Enhancement of antifouling and antibacterial properties of PVC hollow fiber ultrafiltration membranes using pristine and modified silver nanoparticles”, Journal of Environmental Chemical Engineering 6 (2), 1764-1773.
 
  1. Elham Shokri, Reza Yegani, Behzad Pourabbas, Borhan Ghofrani (2018) “Evaluation of modified montmorillonite with di-cationic surfactants as efficient and environmentally friendly adsorbents for arsenic removal from contaminated water”, Water Science & Technology: Water Supply. 18 (2), 460-472
 
  1. A,Behboudi, Y Jafarzadeh, R Yegani (2018), “Incorporation of silica grafted silver nanoparticles into polyvinyl chloride/polycarbonate hollow fiber membranes for pharmaceutical wastewater treatment”, Chemical Engineering, Research and Design. 135, 153-165.
 
  1. Habib Etemadi, Reza Yegani, Mahdi Seyfollahi, Mahyar Rabiee, (2017), “Synthesis, characterization and antifouling properties of cellulose acetate/polyethylene glycol-grafted nanodiamond nanocomposite membranes for humic acid removal from contaminated water”, Iranian Polymer Journal.  1-13.
 
  1. Setareh Hiedari, Yoones Jafarzadeh, Mahdi Seyfollahi, Reza Yegani, (2017), “Study on the fouling behavior of HDPE/PE-g-MA/EVA blend membrane fabricated via thermally induced phase separation method”, Polyolefine Journal.Vol.4. No.2, 235-251.
 
  1. Milad Fonouni, Habib Etemadi, Reza Yegani, Saber Zarin (2017), “Fouling characterization of TiO2 nanoparticle embedded polypropylene membrane in oil refinery wastewater treatment using membrane bioreactor (MBR)”, Desalination and Water Treatment. Vol:90, 99-109.
 
  1. Mahrokh Amini, Habib Etemadi, Abbas Akbarzadeh, Reza Yegani, (2017), “Preparation and performance evaluation of high-density polyethylene/silica nanocomposite membranes in membrane bioreactor system”, Biochemical Eng. Journal, 127, 196-205.
  2.  
  3. Elham Shokri, Reza Yegani & Borhan Ghofrani (2017), “Preparation of a new modified clay with amino acid for anionic pollutant removal from water”, Bulletin de la Société Royale des Sciences de Liège, Vol. 86 (special edition), 157 – 164.
 
  1. Sepideh Tagaddosi, Ali Akbari, Reza Yegani, (2017), “Preparation, characterization and anti-fouling properties of nanoclays embedded polypropylene mixed matrix membranes”, Chemical Engineering, Research and Design, 125, 35-45.
 
  1. Pariya Amirabedi, Reza Yegani, AmirHossein Hesaraki, (2017), “Hydrophobicity optimization of polypropylene hollow fiber membrane by sol–gel process for CO2 absorption in gas–liquid membrane contactor using response surface methodology”, Iranian Polymer Journal. 26, 431-443.
 
  1. Hamid Didari, Mahdi Salami Hosseini, Reza Yegani (2017), “Study on the Viscoelastic Fluid Behavior in Hollow Fiber Membrane Fabrication Process”, Scientia Iranica. doi:10.24200/sci.2017.4490.
 
  1. Ali Behboudi, Yoones Jafarzadeh, Reza Yegani (2017), “Polyvinyl chloride/polycarbonate blend ultrafiltration membranes for water treatment, Journal of Membrane Science, Vol: 534, 18-24.
 
  1. Elham Shokri, Reza Yegani, Abbas Akbarzadeh, (2017) “Novel adsorptive mixed matrix membranes by embedding modified montmorillonite with arginine amino acid into polysulfone for As (V) removal”, Applied Clay Science, Vol. 144, 141-149. 
 
  1. Ali Akbari, Reza Yegani, Behzad Pourabbas, Ali Behboudi, (2017), “Analysis of antifouling behavior of high dispersible hydrophilic poly (ethylene glycol)/vinyl functionalized SiO2 nanoparticles embedded polyethylene membrane”, Desalination and Water Treatment. Vol: 76, 83-97.
 
  1. Habib Etemadi, Reza Yegani, Mahdi Seyfollahi, (2017), “The effect of amino functionalized and polyethylene glycol grafted nanodiamond on anti-biofouling properties of cellulose acetate membrane in membrane bioreactor (MBR) systems”, Separation and Purification Technology, 177, 350-362.
 
  1. Habib Etemadi, Reza Yegani, Valiollah Babaeipour, (2017), “Performance evaluation and anti-fouling analyses of cellulose acetate/nanodiamond nanocomposite membranes in water treatment”, Journal of Applied Polymer Science. Vol: 134, Issue 21, 44873-44886.
 
  1. Milad Fonouni, Reza Yegani , Sattar Anarjani, Akram Tavakoli, (2017)  “Anti-fouling behaviors of surface functionalized high density polyethylene membrane in microfiltration of BSA protein”, Polyolefines Journal. Vol: 4, Issue: 1, 13-26.
 
  1. Mina Ahsani, Meisam Dabiri Havigh, Reza Yegani, (2017), “Fouling mechanisms during protein microfiltration: the effects of protein structure and filtration pressure on polypropylene microporous membrane”, Polyolefines Journal. Vol: 4, Issue: 2, 175-189.
 
  1. Milad Fonouni, Reza Yegani ,Sattar Anarjani, Akram Tavakoli, (2016), “Investigation the effect of various oxidizing agents on the surface functionalization and performance of polypropylene microporous membranes”,  Journal of Textiles and Polymers. Vol: 4, Issue: 2, 92-100.
 
  1. Habib Etemadi, Reza Yegani, Mahdi Seyfollahi, Valiollah Babaeipour, (2017), “Preparation and performance evaluation of cellulose acetate/nanodiamond nanocomposite membrane in the treatment of pharmaceutical wastewater by membrane bioreactor”, Desalination and Water Treatment. Vol: 76, 98-111.
 
  1. A. Behboudi, Y. Jafarzadeh, R. Yegani, A.Akbari, (2017),” Preparation and characterization of polyethylene/ glass fiber composite membrane prepared via thermally induced phase separation method”, Polyolefines Journal.  Vol: 4, Issue: 2, 201-212.
 
  1. E.Shokri, R. Yegani, (2017),” Novel adsorptive mixed matrix membrane by incorporating modified nanoclay with amino acid for removal of arsenic from water”, Journal of Water and Environmental Nanotechnology. Vol: 2, Issue: 2, 88-95. 
 
  1. Ali Akbari, Reza Yegani, Behzad Pourabbas, (2016), “Synthesis of high dispersible hydrophilic poly (ethylene glycol)/vinyl silane grafted silica nanoparticles to fabricate protein repellent polyethylene nanocomposite, European Polymer Journal, 81, 86-97.
  2. E. Shokri, R. Yegani, B. Pourabbas, N. Kazemian, (2016), “Preparation and characterization of polysulfone/organoclay adsorptive nanocomposite membrane for arsenic removal from contaminated water”, Applied Clay Science, 132-133.
 
 
  1. Ali Behboudi, Yoones Jafarzadeh, Reza Yegani, (2016), “Preparation and characterization of TiO2 embedded PVC ultrafiltration membranes”, Chemical Engineering Research and Design, 114, 96-107.
 
  1. F. Karamouz, Hafez Maghsoudi, Reza Yegani, (2016), “Synthesis and characterization of high permeable PEBA membranes for CO2/CH4 separation”, Journal of Natural Gas Science and Engineering, 35, 980-985. 
 
  1. Habib Etemadi, Reza Yegani, Valiollah Babaeipour, (2016), “Study on the reinforcing effect of nanodiamond particles on the mechanical, thermal and antibacterial properties of cellulose acetate membranes”, Diamond and Related Materials, 69, 166-176.
 
  1. Vahid Mortezayikia, Reza Yegani, Omid Tavakoli, (2016), “Membrane-sparger vs. membrane contactor as a photobioreactors for carbon dioxide biofixation of Synechococcus elongatus in batch and semi-continuous mode”, Journal of CO2 Utilization. Vol. 16, 23-31.
 
  1. Ali Akbari, Reza Yegani, Behzad Pourabas, Ali Behboudi, (2016), “Fabrication and study of fouling characteristics of HDPE/PEG grafted silica nanoparticles composite membrane for filtration of Humic acid”, Chem. Eng. Res. & Des.109, 282-296.
 
  1. Vahid Mortezayikia, Reza Yegani, Mohammadamin Hejazi, Samira Chegini (2016), “CO2 biofixation by Dunaliella Salina in batch and semi-continuous cultivations, using hydrophobic and hydrophilic poly ethylene (PE) hollow fiber membrane photobioreactors”, Iranian Journal of Chemical Engineering (IJChE), Vol.13, No.1,
 
  1. Vahid Mortezaeikia, Omid Tavakoli, Reza Yegani, Mohammadali Faramarzi, (2015) “Cyanobacterial CO2 biofixation in batch and semi-continuous cultivation, using hydrophobic and hydrophilic hollow fiber membrane photobioreactors”, Greenhouse Gases: Science and Technology,
 
  1. Ali Akbari, Reza Yegani, Behzad Pourabbas, (2015) “Synthesis of poly (ethylene glycol) (PEG) Grafted Silica Nanoparticles with a Minimum Adhesion of Proteins via One-Pot One-Step Method”, Colloids Surf., A., Physicochem. & Eng. Aspec. Vol.484, 206-215
 
  1. Mina Ahsani, Reza Yegani, (2015) “Study on the fouling behavior of silane nanocomposite modified polypropylene membrane in purification of collagen protein”, Chem. Eng. Res. & Des. Vol. 102, 261-273.
 
  1. Elham Shokri, Reza Yegani, Setareh Heidari, Zahra Shoeyb (2015) “Effect of PE-g-MA compatibilizer on the structure and performance of HDPE/EVA blend membranes fabricated via TIPS method” , Chem. Eng. Res. & Des. Vol. 100, 237-247.
 
  1. Yoones Jafarzadeh, Reza Yegani, (2015), “Thermal, mechanical, and structural properties of ZnO/polyethylene membranes made by thermally induced phase separation method” J. Appl. Polym. Sci. Vol.132, Issue 30, 9471-9478.
 
  1. Y. Jafarzadeh R. Yegani, M. Sedaghat, (2015), “Preparation, characterization and fouling analysis of ZnO/polyethylene hybrid membranes for collagen separation”, Chem. Eng. Res. & Des. Vol. 94, 417-427.
 
  1. Y. Jafarzadeh, R. Yegani, S. B. Tantekin-Ersolmaz (2015), “Effect of TiO2 nanoparticles on structure andproperties of high density polyethylenemembranes prepared by thermally inducedphase separation method”, Polymer. Adv. Tech. Vol. 26, Issue 4, 392-398.
 
  1. Yoones Jafarzadeh, Reza Yegani, (2015)” Analysis of fouling mechanisms in TiO2 embedded high density polyethylene membranes for collagen separation”, Chem. Eng. Res. & Des. Vol.93, 684–695.
 
  1. Saba Raveshyan, Reza Yegani, Behzad Pourabbas, Akram Tavakoli, (2014), “Study on the fabrication of superhydrophobic microporous polypropylene flat membrane using in situ synthesis of modified fluorinated silica nano particles, Advanced Material Research. Vol. 829, 371-375.
 
  1. Mona Zamani Pedram, Mohammadreza Omidkhah, Abtin Ebadi Amooghin, Reza Yegani, (2014) Facilitated transport by amine-mediated poly (vinyl alcohol) membranes for CO2 removal from natural gas, Polymer Engineering& Science, Vol. 54, Issue 6, 1268-1279
  2. Eham Shokri, Reza Yegani, (2013), “Full-Factorial Experimental Design to Determine the Impacts of Influential Parameters on the Porosity and Mechanical Strength of LLDEP Microporous Membrane Fabricated via Thermally Induced Phase Separation Method, Journal of Membrane and Separation Technology.1, 43-51.
 
  1. Pooneh Salehpour, Reza Yegani, Reza Hajmohammadi (2012) Determination of Optimal Operation Conditions for Production of Cephalosporin G from Penicillin G Potassium, Organic Process Research & Development, 16,1507-1512.
 
  1. Eham Shokri, Reza Yegani, (2012) Full-Factorial Experimental Design to Determine the Impacts of Influential Parameters on the Porosity and Mechanical Strength of LLDEP Microporous Membrane Fabricated via Thermally Induced Phase Separation Method, Journal of Membrane and Separation Technology.1, 43-51.
 
  1. Ali Akbari, Reza Yegani, (2012) Study on the impact of polymer concentration and coagulation bath temperature on the porosity of polyethylene membranes fabricated via TIPS method, Journal of Membrane and Separation Technology2, 100-107.
 
 
  1. A. Ebadi Amooghin, M.Zamani Pedram, M. Omidkhah, Reza Yegani, (2013) “A novel CO2-selective synthesized amine-impregnated cross-linked polyvinylalcohol/glutaraldehyde membrane: Fabrication, characterization and gas permeation study”, Greenhouse Gases: Science and Technology, Vol.3, Issue.5, 378-391.
 
  1. M. Zamani Pedram, M. Omidkhah, A. Ebadi Amooghin, Reza Yegani, (2014) “Facilitated transport by amine-mediated poly(vinyl alcohol) membranes for CO2 removal from natural gas”, Polymer Engineering& Science, Vol. 54, Issue .6, 1268-1279.
 
  1. Ali Akbari, Reza Yegani, (2013) Study on the impact of polymer concentration and coagulation bath temperature on the porosity of polyethylene membranes fabricated via TIPS method, Journal of Membrane and Separation Technology, 2, 100-107.
 
  1. P. Amirabedi, R. Yegani, M. K. Razavi Aghjeh (2013) Experimental Design Applied to Fabrication of PSf Membranes via NIPS Method Part1: Influential Parameters on Membrane Porosity and Mechanical Strength, Journal of Textiles and Polymers, Vol.1, No.1, 24-30.
 
  1. P. Amirabedi, R. Yegani, (2014) Experimental Design Applied to Fabrication of PSf Membranes via NIPS Method Part2: Influential parameters on pure water permeability and selection criteria for optimum membrane in MF process, Journal of Textiles and Polymers, Vol. 2, No. 1, 29-34.
 
  1. E. Shokri, R. Yegani, (2013) Central Composite Experimental Design Applied to Fabrication of LLDPE Microporous Membrane via Thermally Induced Phase Separation (TIPS) method, Journal of Textiles and Polymers, Vol. 1, No. 2, 85-90.
 
  1. Ayla Hassani, Reza Yegani, Aydin Hassani (2011)” Improvement of Biological Penicillin Production from Penicillium Chrysogenum Using Molasses as Carbone Source”, Chemical Engineering Transactions, 24, 853-858.
 
  1.  Reza Yegani, Hiroo Hirozawa, Osamu Okada, Masaaki Teramoto and Hideto Matsuyama, (2007) “Selective separation of CO2 by novel facilitated transport membranes at elevated temperatures and pressures” Journal of Membrane Science,291, 157-164
 
  1. Reza Yegani, Satoshi Yoshimura, Kazunori Moriya, Tomohisa Katsuda and Shigeo Katoh, (2005) “Improvement of growth stability of photosynthetic bacterium, Rhodobacter capsulatus” Journal of Bioscience and Bioengineering, vol. 100, No.6, 672-677.
 
  1. Tahereh Kaghazchi, Ali Kargari, Reza Yegani, Abbas Zare, (2006) “Emulsion liquid membrane pertraction of L-lysine from dilute aqueous solutions by D2EHPA mobile carrier” Desalination 190:161-171.
 
  1. Yegani R., Katsuda T., Yoshimura S, Katoh Sh., (2005)“Semi-continuous cultivation of photosynthetic cells in flat plate photobioreactor” Iranian J. of Chem. Eng. Vol.2, No.2, 15-21.
 
  1. Katsuda T., Yegani R., Fujii N., Igarashi K., Yoshimura S., Katoh Sh., (2004)”Effects of light intensity distribution on growth of Rhodobacter capsulatus” Biotechnol. Prog. 20: 998-1000.
 

د: مقالات علمی پژوهشی (ISC) فارسی
 
 


  1. پریا امیرعابدی، رضا یگانی، علی اکبری، بررسی رفتار خیس شدگی غشای الیاف نازک نانوکامپوزیتی از جنس پلی پروپیلن بعنوان تماس دهنده غشایی جهت حذف دی اکسیدکربن، مجله علوم و تکنولوژی پلیمر، (در حال چاپ) 1397.
  2. الهام شکری، رضا یگانی، نعیمه کاظمیان، ساخت و ارزیابی غشاهای زمینه مختلط پلی سولفون/ مونتوموریلونیت اصلاح شده با اسید آمینه در حذف آرسنیک از آب مجله علوم و تکنولوژی پلیمر، سال 30، شماره1 ، 1396.

 

  1. نسرین عطاری، رضا یگانی، یونس جعفرزاده، بررسی اثر غلظت سیال نافذ و دمای حمام انعقاد بر ساختار و عملکرد غشاهای الیاف نازک توخالی پلی‌سولفون در جداسازی پروتئین کلاژن. مجله علوم و تکنولوژی پلیمر، سال 29، شماره6 ، 1395.

 

  1. علی اکبری، رضا یگانی، بهزاد پورعباس، حسن حامدی سنگری" مطالعه بر روی رفتار گرفتگی غشاهای زمینه مختلط پلی اتیلنی حاوی نانوذرات سیلیکای سنتز شده طی فیلتراسیون محلول هیومیک اسید" مجله علوم و تکنولوژی پلیمر، سال 29، شماره 4 ، 1395.

 

  1. یونس جعفرزاده، رضایگانی، معصومه صداقت، تاثیر نانو ذرات TiO2 و ZnO بر روی ساختار و رفتار گرفتگی غشاهای نانوکامپوزیتی پلی اتیلنی، مجله علوم و تکنولوژی پلیمر، سال 28، شماره6 ، 1394.

 
 

  1. علی اکبری، رضا یگانی، علی بهبودی، بررسی تاثیر دمای حمام انعقاد بر مورفولوژی سطحی و عملکرد غشای پلی اتیلنی ساخته شده با روش TIPSدر فرآیند تغلیظ پروتئین کلاژن. مجله علوم و تکنولوژی پلیمر، سال 28، شماره5 ، 1394

 

  1. معصومه صداقت، رضایگانی، یونس جعفرزاده، اکرم توکلی، بررسی اثر افزودنی LiCl و دمای حمام انعقاد بر ساختار و عملکرد غشاهای PVDF،  مجله علمی پژوهشی علوم و تکنولوژی پلیمر، سال 28، شماره 4، مهر-آبان ۱۳۹4.

 
 

  1. زهرا شعیب، رضا یگانی، الهام شکری آماده سازی و ارزیابی غشاهای تخت از ترکیب HDPE/EVA با استفاده از روش TIPS، مجله علمی پژوهشی علوم و تکنولوژی پلیمر،  سال 28، شماره 2، خرداد-تیر 1394.

 
 

  1.   یونس جعفرزاده، رضا یگانی ، الهام شکری، ساخت و ارزیابی غشاهای پلی اتیلنی محتوی زئولیت ZSM-5 با روش جدایش فازی با القاء حرارتی، مجله علمی پژوهشی علوم و تکنولوژی پلیمر،  سال ۲۷، شماره ۵، آذر- دی ۱۳۹۳.

 

  1. مونا زمانی پدرام، محمدرضا امیدخواه، آبتین عبادی آموقین، رضا یگانی، سامانه های پلیمری پلی وینیل آلکل-گلوتارآلدهید آغشته شده به دی اتیل آمین به عنوان غشاهای جداساز گاز CO2-CH4. مجله علمی پژوهشی علوم و تکنولوژی پلیمرو 1391و 25)6( 478-489

 
 
د: مقالات ارائه شده در کنفرانس های بین المللی و ملی
 

  1. Yegani R., Kaghazchi T. Zare A.,”Extraction and recovery of amino acids from dilute aqueous by emulsion liquid membrane”, M.S. Thesis, 4th International Iranian Chemical Engineering Congress, 24-27 April, 2000, Shiraz, Iran 
  2. Yegani R., Kaghazchi T.,”Modeling and simulation of emulsion liquid membrane application in extraction of L-lysine from dilute aqueous solution” 4th International Iranian Chemical Engineering Congress, 24-27 April 2000, Shiraz, Iran 
  3. Norouzi K., Kaghazchi T., Sohrabi M., Yegani R., “Selective separation of Cephalexine from 7-ADCA by emulsion liquid membrane”, 6th National Iranian Chemical Eng. Congress, 7- 10 May, 2001, Isfahan University of Technology, Isfahan, Iran
  4. Yegani R., Salek Asghari F., “Recovery of Ceftazidime-5H2O from its mother liquid with solid-phase extraction”, 7th National Iranian Chemical Eng. Congress, 28-31 Oct. 2002, Tehran University, Tehran, Iran
  5. Yegani R., Fujii N., Igarashi K., Yushimura S., Katsuda, T., Katoh, Sh.,”Effect of light intensity distribution on the stability of growth rate of photosynthetic cells” The Society of Chemical Engineers of Japan (SCEJ), 9-12 September 2003, Tohoku University, Sendai, Japan
  6. Katsuda, T, Yegani R., Fujii N., Igarashi K., Yushimura S., Katoh, Sh., “Effect of light intensity distribution on the growth rate in semi-continuous cultivation of photosynthetic cells”. The Society for Biotechnology, Japan, 16-19 September 2003, Kumamoto University, Kumamoto, Japan
  7. Yegani R., Yoshimura S., Moriya K., Katsuda, T., Katoh, Sh.,“ Engineering aspects of relationship between light intensity distribution and growth rate of photosynthetic cells”, The Society for Biotechnology, Japan, 21-24 September 2004, Nagoya University, Nagoya, Japan
  8. Yegani R., Yoshimura S., Moriya K., Katsuda, T., Katoh, Sh.,” Instability of growth rate in dense culture of photosynthetic cells.” (YABEC), Young Asian Biochemical Engineering Community, 23-25 September, 2004, Osaka, Japan
  9. Yegani R., Yoshimura S., Katsuda, T., Katoh, Sh.,”Relationship between light intensity distribution and growth rate of photosynthetic cells”, (APCChE) Asian Pacific Confederation of Chemical Engineering, 17-21 October, 2004, Kitakyushu, Japan
  10. Yegani R., Yoshimura S., Katsuda, T., Katoh, Sh., “Semi-continuous cultivation of photosynthetic cells in flat plate photobioreactor”, 9th National Iranian Chemical Engineering Congress, 23-25 November 2004, Iran University of Science and Technology, Tehran, Iran
  11. Yegani R., Yoshimura S., Katsuda, T., Katoh, Sh., “Effects of illumination conditions on growth of photosynthetic cells”, 2nd World Congress on Industrial Biotechnology and Bioprocessing, 20-22 April, 2005, Orlando, Florida, USA
  12. Yegani R., Yoshimura S., Katsuda, T., Katoh, Sh., “Growth stability of photosynthetic bacteria: Effects of supplemental illumination and ferrous ion concentration”, 12th European Congress on Biotechnology, 21-24 August 2005, Copenhagen, Denmark.
  13. Katsuda T., Yegani R., Yoshimura S., Moriya K., Katoh, S., “ Examining of the operation conditions in semi- continuous cultivation of the photosynthetic bacterium” The Society of Chemical Engineers of Japan (SCEJ 37th Autumn Meeting) 15-17 September 2005, Okayama University, Okayama, Japan
  14. Hiroho Hirosawa, Masaaki Teramoto, Reza Yegani, Hiroaki Himei, Osamu Okada, Tomohiro Sotani, Naoto Ohmura and Hideto Matsuyama, “ Novel catalytic CO reforming membrane reactor” (SCEJ 38th Autumn Meeting) 16-18 September 2006, Kyushu University, Fukuoka, Japan
  15. Reza Yegani, Hiroho Hirosawa, Masaaki Teramoto, Hiroaki Himei, Osamu Okada, Tomohiro Sotani, Naoto Ohmura and Hideto Matsuyama, “ Development of CO2 selective membrane for catalytic membrane reactor” International workshop on Process intensification in fluid and particle engineering, 15-18 October 2006, Kobe University, Kobe, Japan
  16. H. Hirosawa, M. Teramoto, Reza Yegani, H. Himei, O. Okada, T. Sotani, N. Ohmura and H. Matsuyama, “Development of CO2 selective membrane used in high temperature condition” Membrane symposium, 21-22 November, 2006, Kyoto University, Kyoto, Japan
  17. R. Yegani, M. Teramoto, H. Hirosawa, H. Himei, O. Okada, N. Ohmura and H. Matsuyama, “Development of novel facilitated transport membrane for selective separation of CO2  in water gas shift membrane reactor” The Fourth Conference of Aseanian Membrane Society AMS4 in Taipe, 16-18 August, 2007, Taipe, Taiwan
  18. R. Yegani, M. Teramoto, H. Himei, O. Okada, N. Ohmura and H. Matsuyama, “Development of CO2 selective membrane used in high temperature condition for application to membrane reactor” (SCEJ 39th Autumn Meeting) 13-15 September 2007, Hokkaido University, Sapporo, Japan
  19. Osamu Okada, Masaaki Teramoto, Hiroaki Himei, Reza Yegani, Hideto Matsuyama, Naoto Ohmura, Masahiro Goto, Hidetoshi Kita, “Development of advanced reforming system for H2 station using CO converter equipped with CO2 selective membrane” Fuel Cell Seminar & Exposition, 15-19 October 2008, San Antonio, Texas, USA
  20. R. Yegani, M. Teramoto, H. Hiorozawa, H. Himei, O. Okada, N. Ohmura and H. Matuyama " Development of novel facilitated transport membrane for selective separation of CO2 from H2 and N2" 1st  Iran Petrochemical Conference, IPC 2008, 22-23 July 2008, Tehran, Iran.
  21. Reza Yegani, Masaaki Teramoto, Osamu Okada and Hideto Matuyama "Evaluation of Novel Facilitated Transport Membrane for Selective Separation of CO2 from H2 at Elevated Temperature and Pressures" 12th Iranian National Congress of Chemical Engineering, 20-23 October 2008, Sahand University of Technology, Tabriz, Iran
  22. R. Yegani, Younes Jafarzadeh, Naser Saadat” Study on the stability of facilitated transport membrane in Hydrogen purification” The first Iranian national Membrane and membrane processes Conference, 15-16 Febuary 2011, Tehran University, Tehran, Iran  
 
  1.  الهام شکری، زهرا گودرزی، میر کریم رضوی آقجه، رضا یگانی" بررسی عوامل مؤثر بر میزان تخلخل غشاهای ساخته شده به روش جدایش فازی با القاء حرارتی" اولین کنفرانس ملی غشاو 26-28 بهمن 1389، دانشگاه تهران، تهران، ایران
  2. الهاام شکری، محبوبه شهابی، حامد سلیمانی، رضا یگانی" ساخت غشا الیاف نازک توخالی به روش جدایش فازی با القاء حرارتی و اثر استخراج­کننده بر ریزساختار غشا"  اولین کنفرانس ملی غشاو 26-28 بهمن 1389، دانشگاه تهران، تهران، ایران
  3. حامد سلیمانی، علی اکبری ، محبوبه شهابی، رضا یگانی" ساخت غشای پلیمری الیاف توخالی PVDF به وسیله اندرکنش بین حلال و غیر حلال" اولین کنفرانس ملی غشاو 26-28 بهمن 1389، دانشگاه تهران، تهران، ایران
 
  1. Aref Dadgostar, Reza Yegani, Yoones Jafarzadeh, “Preparation of isotactic polypropylene microporous membranes via thermally induced phase separation (TIPS) method”, 7th International chemical engineering congress and exhibition, Kish Island, November 2011
 
  1. Ali. Akbari, Reza Yegani, Mir Karim Razavi, Maryam Alikhani, “Preparation of High Density Polyethylene Membranes via Thermally Induced Phase Separation”, 7th International chemical engineering congress and exhibition, Kish Island, November 2011
 
  1. Hamed Soleymani, Reza Yegani, Mahboobeh Shahabi, “Fabrication of porous PVDF hollow fiber and flat membranes by immersion precipitation using Taguchi experimental design”, 7th International chemical engineering congress and exhibition, Kish Island, November 2011
 
  1. Parya Amirabedi, Reza Yegani, Hamed Soleymani, “Affecting parameters on the microstructural morphology of microporous polysulfone membranes via nonsolvent induced phase separation”, 7th International chemical engineering congress and exhibition, Kish Island, November 2011]
 
  1. Leyla Noori, Reza Yegani, Mir Karim Razavi, Nader Jahanbakhsh, Elham Shokri, “A novel hydrophilized HDPE/EVA microporous flat sheet membranes via thermally induced phase separation (TIPS) method”, 7th International chemical engineering congress and exhibition, Kish Island, November 2011
 
  1. Elham Shokri, Reza Yegani, Mir Karim Razavi, “The effect of linear low density polyethylene (LLDPE) molecular weight on the property of microporous membrane formation via thermally induced phase separationو 7th International chemical engineering congress and exhibition, Kish Island, November 2011
 
  1. Maryam Alikhani, Reza Yegani, Elham Shokri, Hannaneh Jahanbakhsh, “Comparative study of zeolite-filled LLDPE and HDPE microporous mixed matrix (ZeoTIPS) membranes”, Comparative study of zeolite-filled LLDPE and HDPE microporous mixed matrix (ZeoTIPS) membranes, Polymer Processing Society 2011 Asia/Australia Regional Meeting, PPS 2011, Kish Island,  November 2011
 
  1. Leyla Noori, Reza Yegani, Mir Karim Razavi, Nader, Elham Shokri, “Fabrication of melt blended HDPE/EVA microporous flat sheet membranes via TIPS method”, Polymer Processing Society 2011 Asia/Australia Regional Meeting, PPS 2011, Kish Island,  November 2011
 
  1. Mahboobeh Shahabi, Reza Yegani, Nasser Saadat, Hamed Soleymani, “Impact of MEA and NaOH solutions on mechanical properties of microporous hollow fiber polymeric membranes structure”, Polymer Processing Society 2011 Asia/Australia Regional Meeting, PPS 2011, Kish Island,  November 2011
 
  1. Hamed Soleymani, Reza Yegani, Mir Karim Razavi, “Investigation of the affecting parameters on the morphology of PVDF microporous membranes using Taguchi experimental design”, Polymer Processing Society 2011 Asia/Australia Regional Meeting, PPS 2011, Kish Island,  November 2011
 
  1. Elham Shokri, Reza Yegani, Mir Karim Razavi, Zahra Goodarzi, “The effect of molecular weight of LLDPE on the structural and operational properties of microporous membranes prepared via TIPS method”, Polymer Processing Society 2011 Asia/Australia Regional Meeting, PPS 2011, Kish Island,  November 2011
 
  1. Parya Amirabedi, Reza Yegani, Jafar Heydari, “The effect of PEG concentration and coagulation bath composition on the morphology of microporous PSf membrane prepared via NIPS method”, Polymer Processing Society 2011 Asia/Australia Regional Meeting, PPS 2011, Kish Island,  November 2011
 
  1. Maryam Farahi, Mehdi Salami Hosseini, Reza Yegani, Elham Shokri, “Simulation of Polymer-diluent flow field in spinneret in fabrication of hollow fiber membrane via Thermally induced phase separation method”, Polymer Processing Society 2011 Asia/Australia Regional Meeting, PPS 2011, Kish Island,  November 2011
 
  1. Ali Akbari, Reza Yegani, Yoones Jafarzadeh, Aref Dadgostar, “Application of full factorial experimental design to investigate the impact of polymer concentration and coagulation bath temperature in fabrication of microporous PE membranes via TIPS method”, 7th Conference of Aseanian Membrane Society (AMS7), July4-6, 2012, Busan, Korea
 
  1. Aref Dadgostar, Reza Yegani, Yoones Jafarzadeh and Ali Akbari,” Investigation of polymer concentration and coagulation bath composition on the isotactic polypropylene microporous membranes properties prepared via thermally induced phase separation”, 7th Conference of Aseanian Membrane Society (AMS7), July4-6, 2012, Busan, Korea
 
  1. Yoones Jafarzadeh, Reza Yegani, Ali Akbari, Aref Dadgostar,” Effect of zeolite filler on the mechanical strength of polymeric membranes prepared via thermally induced phase separation method”, 7th Conference of Aseanian Membrane Society (AMS7), July4-6, 2012, Busan, Korea.
 
  1. Elham Shokri, Reza Yegani,” Central composite design applied to investigate the diluent evaporation effect on hollow fiber polyethylene membranes structure prepared via thermally induced phase separation method”, 7th Conference of Aseanian Membrane Society (AMS7), July4-6, 2012, Busan, Korea.
 
  1. Elham Shokri, Reza Yegani, Nasrin Attari, “Effect of nanoclay on the structure and performance of polysulfone nanocomposite membranes, Asian Nano Conference (ANFC) 2015.
 
  1. Elham Shokri, Reza Yegani, “Adsorptive removal of arsenic from water by a PSf/nanoclay nanocomposite membrane” Asian Nano Conference (ANFC) 2015.
 
  1. Yoones Jafarzadeh, Reza Yegani, Ali Akbari, “Removal of Humic Acid from water by ZnO/HDPE nano composite membrane”, Asian Nano Conference (ANFC) 2015.
 
  1. Ali Akbari, Reza Yegani, Behzad Pourabbas, Younes Jafarzadeh, Ali Behboudi, “Synthesis of Polyethy;lene glycol vinyl silane grafted silica nanoparticle”, Asian Nano Conference (ANFC) 2015.
 
  1. Mina Ahsani, Reza Yegani, “Preparation of hydrophilic polypropylene membrane by in situ synthesis of SiO2 nanoparticles” Asian Nano Conference (ANFC) 2015.
 
  1. Mina Ahsani, Reza Yegani, Mahrokh Amini, “Study on the antifouling properties of organic-inorganic nanocomposite polypropylene membrane”, Asian Nano Conference (ANFC) 2015.
 
  1. Mina Ahsani, Reza Yegani, “Preparation of hydrophilic polypropylene membrane by in situ synthesis of SiO2 nanoparticles”, The 5th International congress on Nanoscience and Nanotechnology (ICNN2014), 22-24 Octobr 2014, Tarbiat Modares University, Tehran, Iran.
 
  1. Ali Akbari, Reza Yegani, Behzad Pourabbas, Ali Behboudi, “Preparation and characterization of HDPE/SiO2 nanocomposite membranes via TIPS method”, 12th International Conference of Membrane Science and Technology, Tehran, Iran, 2015.
 
  1. Nazila Entekhabi, Parya Amirabedi, Ali Farzi, Reza Yegani, “Thermodynamic investigation of three phase diagram in polymer solutions for membrane synthesis using liquid-liquid phase separation”, 12th International Conference of Membrane Science and Technology, 1-3 Nov., 2015, Tehran, Iran.
 
 
  1. Ali Behboudi , Yoones Jafarzadeh, Reza Yegani, Ali Akbari ,Mohammad Javad Shahbazi, Mahdi Mirzababayi, Fabrication of functionalized glass fiber reinforced HDPE microporous membranes for water treatment, The 12th International Conference on Membrane Science and Technology ( MST2015) 1-3 November 2015.
 
  1. 2- Ali Behboudi, Yoones Jafarzadeh, Reza Yegani, Ali Akbari ,Mona Hashemzadeh, Preparation and Characterization of HDPE/SiO2 Nanocomposite Membranes via TIPS Method, The 12th International Conference on Membrane Science and Technology ( MST2015) 1-3 November 2015.
 
  1. Ali Akbari, Reza Yegani, Behzad Pourabas, Ali Behboudi, Fabrication of Microporous Polyethylene/PEG Grafted Silica Nanoparticle Mixed Matrix Membrane via TIPS Method, The 12th International Conference on Membrane Science and Technology ( MST 2015) 1-3 November 2015.
 
  1. Elham Shokri, Reza Yegani, “Fabrication of Polysulfone-Organoclay Mixed Matrix Membrane for Arsenic Remova”, 12th International Conference of Membrane Science and Technology, Tehran, Iran, 2015.
 
  1. Pariya Amirabedi, Reza Yegani, “Fabrication and characterization of superhydrophobic PP hollow fiber membranes for CO2absorption in membrane contactors”, 12th International Conference of Membrane Science and Technology, Tehran, Iran, 2015.
 
  1. Farahnaz Karamouz, Hafez Maghsoudi, Reza Yegani, “Fabrication of high permeable PEBA membranes for CO2/CH4 separation”, 12th International Conference of Membrane Science and Technology, Tehran, Iran, 2015.
 
  1. F. Masnsourizadeh, Reza Yegani, Ali Akbari, “Fabrication of Microporous Polyethylene/PEG Grafted Silica Nanoparticle Mixed Matrix Membrane via TIPS Method”, 12th International Conference of Membrane Science and Technology, Tehran, Iran, 2015.
 
  1. Pariya Amirabedi, Reza Yegani, “The influence of the sol–gel parameters on the wetting properties of the polypropylene membranes”, 12th International Conference of Membrane Science and Technology, Tehran, Iran, 2015.
 
  1. Ali Akbari, Reza Yegani, Behzad Pourabbas, Ali Behboudi, “ Investigation the fouling behavior of HDPE-silica nanocomposite membrane in the filtration of humic acid (HA) solution”, 12th International Conference of Membrane Science and Technology, Tehran, Iran, 2015.
 
  1. F. Masnsourizadeh, Reza Yegani, Ali Akbari, “Analysis of Hermia fouling models for membrane prepared from blending of HDPE and poly (ethylene glycol) for humic acid (HA) separation”, 12th International Conference of Membrane Science and Technology, Tehran, Iran, 2015.
 
  1. Ali Akbari, Reza Yegani, “Fabrication of hydrophilized polyethylene membrane via blending with poly (ethylene glycol)”, 12th International Conference of Membrane Science and Technology, Tehran, Iran, 2015.
 
  1. Habib Etemadi, Reza Yegani, Valiollah Babaeipour (2016), “The effect of nanodiamond particles on the abrasion resistance of cellulose acetate membranes”, 12th International Seminar on Polymer Science and Technology, Tehran, Iran.
 
  1. Habib Etemadi, Reza Yegani, Valiollah Babaeipour (2016), “A novel cellulose acetate/nanodiamond nanocomposite membrane for water treatment”, 12th International Seminar on Polymer Science and Technology, Tehran, Iran.
 
  1. Mahdi Seyfollahi, Reza Yegani, Habib Etemadi, Mahyar Rabiee (2016), “The effect of polyethylene glycol grafted nanodiamond on the mechanical and antibacterial properties of cellulose acetate membrane”, 12th Internaational Seminar on Polymer Science and Technology, Tehran, Iran.
 
  1. Elham Shokri, Reza Yegani, Borhan Ghofrani, “Preparation of regenerable modified montmorillonite with aminoacids for arsenic removal from water”, 3rd International Conference on Recent innovations in Chemistry & Chemical Engineering, September, 2016.
 
 
  1. میلاد فنونی، رضا یگانی، حبیب اعتمادی، "ارزيابي عملكرد غشاهاي نانوكامپوزيتي پلي پروپيلني در بيوراكتورهاي غشايي براي تصفيه فاضلاب شركت پالايش نفت تبريز" (1395) ، هشتمین همایش ملی و نمایشگاه تخصصی مهندسی محیط زیست، دانشگاه تهران.

 
 
 
 
 

       
 
صفحه اصلی | وب سایت دانشگاه صنعتی سهند | تماس با ما
دانشگاه صنعتی سهند ، دانشکده مهندسی شیمی - صندوق پستی: 1996-51335 | دفتر دانشکده مهندسی شیمی: 33459152-041 | info.che@sut.ac.ir