جمعه، 10 فروردین 1403 تماس با ما نقشه سایت صفحه اصلی English
 
 

 
 
     

جعفرصادق مقدس
مرتبه علمی :استاد
تخصص : مهندسی شیمی - پدیده های انتقال
زمینه های تحقیقاتی :  پدیده‌های انتقال  نانو ساختارها  اختلاط  سیالات چند فازی
مراکز تحقیقاتی :مرکز تحقیقات پدیده های انتقال

پست الکترونیکی: jafar.moghaddas@sut.ac.ir
شماره تلفن: 04133459155
شماره فکس: 04133459155
رزومه:

"رزومه"

اطلاعات شخصی:
نام و نام خانوادگی: دکتر جعفرصادق مقدس
تاریخ تولد: 15/12/1344
آدرس محل کار: تبریز- دانشگاه صنعتی سهند- دانشکده مهندسی شیمی
تلفن و فاكس محل کار: 33459155 -041
تلفن همراه: 09143043836 
آدرس پست الکترونیکی: jafar.moghaddas@sut.ac.ir 
 
تحصیلات:
دکتری: مهندسی شیمی- پدیده های انتقال، اختلاط- دانشگاه لوند- سوئد- 1382
کارشناسی ارشد: مهندسی شیمی - مخازن هیدروکربنی- دانشگاه تهران با همکاری دانشگاه صنعت نفت- 1371
کارشناسی: مهندسی شیمی- دانشگاه تهران- 1369
 
تجربیات کاری:
الف) دانشگاهی:
(تاکنون- 1391) استاد تمام- دانشگاه صنعتی سهند- دانشکده مهندسی شیمی
(1391- 1388) دانشیار- دانشگاه صنعتی سهند- دانشکده مهندسی شیمی
(1388- 1383) استادیار- دانشگاه صنعتی سهند- دانشکده مهندسی شیمی
(1378- 1371) مربی- دانشگاه صنعتی سهند- دانشکده مهندسی شیمی
(1371- 1369) همکار مدرس برای حل تمرین- دانشگاه صنعت نفت
 
ب) اجرایی و عضویت ها:
(1387- 1384) رییس دانشکده مهندسی شیمی دانشگاه صنعتي سهند
(1378- 1373) مدیر کل آموزش- دانشگاه صنعتی سهند
(1373- 1372) معاون اداره کل آموزش- دانشگاه صنعتی سهند
(تاکنون- 1396) رئیس کارگروه تخصصی مهندسی شیمی گسترش و  برنامه ریزی آموزش عالی وزارت علوم تحقیقات و فن آوری
(تاکنون- 1393) عضو کارگروه تخصصی مهندسی شیمی گروه فنی و مهندسی دفتر برنامه ریزی آموزش عالی وزارت علوم تحقیقات و فن آوری
(تاکنون- 1396) عضو گروه فنی و مهندسی شورای گسترش و  برنامه ریزی آموزش عالی وزارت علوم تحقیقات و فن آوری
(1396- 1393)  نماینده وزیر علوم ، تحقیقات و فن آوری در هیات  ممیزه دانشگاه صنعتی سهند
(1397 - 1393)  عضو حقیقی هیات  ممیزه دانشگاه صنعتی سهند
(1396- 1393)  نماینده وزیر علوم ، تحقیقات و فن آوری در هیات  ممیزه دانشگاه شهید مدنی آذربایجان
(تاکنون - 1397)  نماینده وزیر علوم ، تحقیقات و فن آوری در هیات  ممیزه دانشگاه شهید مدنی آذربایجان
(1397- 1393)  نماینده وزیر علوم ، تحقیقات و فن آوری در هیات امنای موسسه آموزش عالی غیردولتی –  غیر انتفاعی اسوه
(1397- 1393)  نماینده وزیر علوم ، تحقیقات و فن آوری در هیات امنای موسسه آموزش عالی غیردولتی – غیر انتفاعی دانشوران
 (تاکنون- 1396) عضو شورای راهبردی دانشگاه
 (تاکنون- 1384) عضو هیات تحریریه مجله مهندسی شیمی ایران
(تاکنون- 1385) عضو هیات تحریریه مجله (IAChE)Iranian Chemical Engineering Journal
(تاکنون- 1392 ) عضو هیات تحریریه مجله Applied Materials Synthesis & Characterization
(تاکنون- 1378) عضوانجمن مهندسی شیمی ایران
 (1394- 1390) مشاور ریاست پژوهشگاه استاندارد و مسئول پژوهشکده شمالغرب استاندارد
(تاکنون- 1386) مسئول کمیته علمی المپیاد مهندسی شیمی کشور در قطب 4
(تاکنون- 1385) داور مسابقات ملی کمیکار ایران
(تاکنون- 1386) مدیر گروه مهندسی شیمی با گرایش گاز
(تاکنون- 1386) استاد راهنمای دانشجویان ورودی­های سال تحصیلی 86 – 87
(تاکنون- 1384) سرپرست مرکز تحقیقات پدیده های انتقال
(1389- 1386) مدیر گروه پدیده­های انتقال
(1389- 1386) مسئول پروژه­های دانشکده در مقاطع کارشناسی، کارشناسی ارشد و دکتری
(تاکنون- 1385) رئیس کمیته اجرایی انجمن مهندسی شیمی شعبه شمالغرب کشور
(1392- 1387) عضو دائم هیات مدیره انجمن مهندسی شیمی ایران
(1392- 1389) مشاور شبکه آزمایشگاه­های علمی ایران (شاعا) در استان آذربایجان شرقی
 (تاکنون- 1387) عضو کمیته منتخب دانشکده مهندسی شیمی
(تاکنون- 1387) عضو کمسیون تخصصی هیات ممیزه دانشگاه
(1378 - 1371) عضو شورای آموزشی دانشگاه
(1378-1376) رئیس کمیته تنیس روی میز دانشگاه
(1387- 1384) عضو شورای پژوهشی شرکت ملی گاز استان آذربایجان شرقی
(1392-1372) عضو هیئت مدیره صندوق قرض الحسنه اساتید دانشگاه
(1392=1389) عضو هیئت مدیره صندوق قرض الحسنه رفاه دانشگاه
(تاکنون- 1390) عضو هیئت مدیره و مدیر عامل تعاونی مسکن اعضای هیئت علمی دانشگاه
 
دروس تدریس شده:
کنترل فرایندهای مهندسی شیمی (مقطع کارشناسی)
کاربرد ریاضیات در مهندسی شیمی (مقطع کارشناسی)
موازنه جرم و انرژی (مقطع کارشناسی)
شیمی فیزیک (مقطع کارشناسی)
اصول و مبانی مهندسی در مهندسی صنایع غذایی (مقطع کارشناسی)
شیمی عمومی 1 و 2 (مقطع کارشناسی)
مکانیک سیالات 1 و 2 (مقطع کارشناسی)
مکانیک سیالات دو فازی (مقطع کارشناسی)
مبانی مهندسی مخازن (مقاطع کارشناسی و کارشناسی ارشد)
جریان سیالات در محیط های متخلخل (مقطع کارشناسی ارشد)
پدیده های انتقال(مقطع کارشناسی ارشد)
اصول مهندسی پیشرفته (درس تخصصی مهندسی صنایع غذایی در مقطع کارشناسی ارشد)
ریاضیات پیشرفته (مقطع کارشناسی ارشد)
مکانیک سیالات پیشرفته (مقطع کارشناسی ارشد)
پدیده های انتقال در صنایع غذایی (مقطع کارشناسی ارشد)
پدیده های انتقال در محیط های متخلل (مقطع کارشناسی ارشد)
جریان­های چند فازی (مقطع دکتری)
موارد ویژه (مقطع دکتری)
 
موضوعات تحقیقاتی مورد علاقه:
اختلاط
مشاهده جریان با استفاده از روش­های لیزری و اپتیکی
پدیده­های انتقال
سنتز و کاربردهای سیلیکا ائروژل
محیط­های متخلخل
مطالعات ازدیاد برداشت از مخازن (EOR)
جریان های چند فازی
جریان های آشفته
جابجایی قابل اختلاط سیالات از محیط­های متخلخل
 
 
پروژه های تحقیقاتی انجام شده:
الف) مجری اصلی
1391- 1389  سیلیکا ائروژل نانو متخلخل- حمایت شده توسط وزارت صنایع و معادن
1385- 1384  طراحی و ساخت پایلوت برای تولید کک نفتی- حمایت شده توسط شرکت پتروشیمی تبریز
تاکنون- 1392  مطالعه تکنیک­های اندازه­گیری جریان پیشرفته توسط PLIF، PIV، اولتراسونیک
1385-1384         مطالعه اختلاط در یک استاتیک میکسر- دانشگاه صنعتی سهند
1386-1385         طراحی و ساخت استاتیک میکسر دو فازی- دانشگاه صنعتی سهند
1374 -1373 مطالعه تزریق بخار در یک مدل دوبعدی شبیه سازی شده آزمایشگاهی متخلخل برای افزایش جابجایی هیدروکربن سنگین- دانشگاه صنعتی سهند
ب) مجری داخلی و مسئول طرحهای تحقیقاتی پژوهشگاه استاندارد
 
1392 – 1391       بررسی نقاط لاک نخورده در قوطی های با لاک سفید – شرکت برتران قوطی خاورمیانه
1392 – 1391       طراحی تنور گازی خانگی – شرکت گوهر آسایش
1392 – 1391       جمع آوری اطلاعات و ارزیابی امکان سنجی تدوین استاندارد ملی برای پوشش کامپوزیت پلی استایرنی –  شرکت نوین ابزار خانه
1393 – 1391       تعیین ویژگی های مطلوب برای ماست خامه ای گیاهی با روغن پالم – شرکت آذر نام شمس
1392 – 1390       تحقیق و تدوین استاندارد ملی ویژگی های لوله های مسی بدون درز برای سیستم های تهویه هوا خنک
                           سازی و ارائه روش های آزمون – شرکت مهر اصل
1392 – 1390       تحقیق و تدوین استاندارد ملی ویژگی های لوله های مسی بدون درز – شرکت مهر اصل
1392 – 1391       تحقیق در زمینه نحوه ارتقا و بهینه سازی مصرف انرژی یخچال – شرکت ایمن افروز تبریز
1392 – 1391       تععین ویژگیهای مطلوب برای کابینت های زیر روشویی – شرکت آراز پی – وی - سی
 
 
کارهای تحقیقاتی منتخب:


  • The Application of Petrochemical materials in Food packaging industry, Accepted for 1th Industry – Agriculture, February 1997, Isfahan, Iran.
  • The Survey on Miscibility of Maroon Crude and Hexane with CO2, Accepted for 2nd Baku International Mamedaliev Petrochemical Congress, June 1996, Baku, Azerbaijan (J.S. Moghaddas and R. Kharrat).
  • Experimental studies of miscibility of liquid Hydrocarbons with CO2 at Slim Tube apparatus, Accepted for 5th Oil, Gas and Petrochemical Congress, Tehran, Iran (J.S. Moghaddas and R. Kharrat).
  • Regeneration of Hydrocracking Catalysts of Tabriz Refinery, Research in Sahand University of Technology, 1997 (A. Khudiev, M. Haghighi, J.S. Moghaddas and H. Nikakhtari)
  • A Study in Relationship between Parameters of Equation of States, Research in Sahand University of Technology, 1993 (S.A. Tabatabaeinejhad and J.S. Moghaddas).
  • Construction of a Slime-Tube apparatus for studying Miscibility.
  • Experimental producing an Automobile under-body coating isolation cover.
  • Steam flooding in one- and two-dimensional porous system for sweeping the heavy liquids.
 
 

 
 
 
 
مقالات چاپ شده در مجلات معتبر:

  1. J.S. Moghaddas, C. Tragardh, T. Kovacs and K. Ostergren, A new method for measuring concentration of a fluorescent tracer in bubbly gas-liquid flows, Experiments in Fluids, Vol. 32, 2002.
  2. J.S. Moghaddas, C. Tragardh, K. Ostergren and J. Revstedt, A comparison of the Mixing Characteristics in Single- and Two-Phase Grid-Generated Turbulent Flow Systems, Chemical Engineering & Technology, Vol. 6, 2004.
  3. H. Bargozin, J.S. Moghaddas, A. Khudiev, M.R. Malek Abbaslou, Petroleum coke, coking process and applications, Iranian Journal of IAChE, Vol. 4, No. 16, 2005 (in Farsi).
  4. J.S. Moghaddas, C. Tragardh, J. Revstedt and K. Ostergren, A study of flow and Mixing in Bubbly Gas-Liquid Pipe Flow Generated by a Grid, IAChE, Vol. 3, No. 4, 2006.
  5. B. Moshtari, E. Ganji, J.S. Moghaddas, Experimental study of sparger type and liquid height effect on gas holdup in bubble column reactors, Petroleum research, volume 17, 2007, 84-90 (in Farsi).
  6. B. Moshtari, J.S. Moghaddas, E. Gangi, A hydrodynamic experimental study of slurry bubble column, Studies in Surface Science and Catalysis, Vol. 167, 67-72, 2007.
  7. S. Ebrahimi, J.S. Moghaddas, M.K. Razavi Aghjeh, Study on thermal cracking behavior of Petroleum Residue, Fuel, Vol. 87, 1623-1627, 2008.
  8. K. Shayesteh, J.S. Moghaddas, Investigation of segregation in solids mixing, Iranian Journal of IAChE, Vol. 6, No. 34, 9-14, 2008 (in Farsi).
  9. T. Yosefi Amir, J.S. Moghaddas, A Review on the Jet mixing in Vessels, Journal of Faculty of Engineering (Special issue on: Chemical Engineering), University of Tehran, Vol. 42, No.2, 219-238, 2008 (in Farsi).
  10. K. Ghasemzadeh, J. S. Moghaddas, T. Yousefi Amiri, Experimentally Production and Investigating of Petroleum Coke Produced from Distillation Columns of Tabriz Petrochemical Company, Frayandno, No. 16, 35-41, 2008 (in Farsi).
  11. K. Shayesteh, J.S. Moghaddas, Investigation of Mixing in Solids, Iranian Journal of IAChE, Vol.7, No. 36, 3-14, 2008 (in Farsi).
  12. R. Zadghaffari, J.S. Moghaddas, J. Revstedt, A Study on Liquid-Liquid Mixing in a Stirred Tank with a 6-Blade Rushton Turbine, Iranian Journal of Chemical Engineering, Vol. 5, No. 4, 2008.
  13. B. Moshtari, E. Ganji, J. S. Moghaddas, Experimental study of gas hold-up and bubble behavior in gas – liquid bubble column, Petroleum & Coal, Vol. 51 (1), 27-32, 2009.
  14. R. Zadghaffari, J.S. Moghaddas, J. Revstedt, Study of flow field, power and mixing time in a two phase stirred vessel with dual Rushton impellers: Experimental observation and CFD simulation, Chemical Product and Process Modeling, Vol. 4, 2009.
  15. R. Zadghaffari, J.S. Moghaddas, J. Revstedt, A Mixing Study in a Double-Rushton Stirred Tank, Computers & Chemical Engineering, 33, 1240–1246, 2009.
  16. H. Barghozin, J.S. Moghaddas, M. Samet, S.A. Taheri, Economical Study of Nanofluids Effects in Heat Exchangers of Tehran Refinery Company, Frayandno, No. 19, 37-48, 2009 (in Farsi).
  17. M. Choopani, S. Gheibi, M. Taghavi, J.S. Moghaddas, Effect of Impeller Types on Mixing Time in Stirred Tanks, Iranian Journal of IAChE,Vol. 8, No. 40, 60-65, 2009 (in Farsi).
  18. K. Shayesteh, J.S. Moghaddas, M. Haghighi, G. Imanzadeh, A mechanochemical reaction for highly efficient preparation of 1-bi-2-naphthol from 2-naphthol, Scientific Research and Essay, Vol.4 (11), 1201-1204, 2009.
  19. T. Yousefi Amiri, J.S. Moghaddas, Experimental Study of the Mixing Time in a Jet Mixed Gas-Liquid System, Chemical Engineering & Technology, Vol. 33 (2), 327-333, 2010.
  20. R. Zadghaffari, J.S. Moghaddas, J. Revstedt, Large-eddy Simulation of Turbulent Flow in a Stirred Tank Driven by a Rushton Turbine, Computers and Fluids, 39, 1183–1190, 2010.
  21. S. Ebrahimi, J.S. Moghaddas, An Experimental Study of Coking Process, International Journal of Chemical Reactor Engineering, Vol. 8, 2010.
  22. K. Shayesteh, J.S. Moghaddas, M. Haghighi, H. Eskandari, Development of a Monitoring Method for Oxidative Coupling Reaction of 2-Naphthol in Solid State, Asian Journal of Chemistry, Vol. 22, No. 3, 2106-211,. 2010.
  23. R. Zadghaffari, J.S. Moghaddas, Evaluation of drag force effect on hold-up in a gas-liquid stirred tank reactor, Journal of Chemical Engineering of Japan, Vol. 43, No. 10, 2010.
  24. H. Bargozin, L. Amirkhani, J. S. Moghaddas, M. M. Ahadian, Synthesis and application of silica aerogel-MWCNT nanocomposites for adsorption of organic pollutants, Scientia Iranica, Vol. 17, No. 2,122-132, 2010.
  25. T. Yousefi Amiri, J. S. Moghaddas, Y. Moghaddas, A jet mixing study in two phase gas – liquid systems, Chemical Engineering Research and Design, Vol. 89, 352-366, 2011.
  26. M. Taghavi, R. Zadghaffari , J.S. Moghaddas, Y. Moghaddas, Experimental and CFD Investigation of Power Consumption in a Dual Rushton Turbine Stirred Tank, Chemical Engineering Research and Design, Vol. 89, 280-290, 2011
  27. R. Zadghaffari, J.S. Moghaddas, F. Fakheri, H. Razmi, H. Heidari, Modeling and optimizing of mechanically agitated vessels by central composite rotatable design method, International Journal of Chemical Reactor Engineering, Vol. 9 (A3), 2011.
  28. L. Amirkhani, H. Bargozin, J.S. Moghaddas, M. M. Ahadian, Synthesis nanoporous silica aerogel for adsorption and separation of hydrocarbonic materials from water, Journal of Separation Science and Engineering, Vol. 2, No. 2, 55-68, 2011.
  29. L. Feyzi, J.S.Moghaddas, A. Tavakkoli, Thermodynamic Hydrate Inhibitors for Preventing of Gas Hydrates Formation in Gas Pipeline Transmission, Iranian Journal of IAChE, Vol. 9, No. 53, 50 -60, 2011 (in Farsi).
  30. A. Sadeghzadeh Namavar, J.S. Moghaddas, Influence of injection angle in a jet mixer, Iranian journal of Chemistry and Chemical Engineering, Vol. 30, 2011, (in Farsi).
  31. S. Abdollahi, J.S. Moghaddas, D. Mowla, Treatment of oil polluted industrial wastewater in a sequence batch membrane bioreactor, Journal of Separation Science and Engineering, Vol. 3, No. 1, 2011.
  32. F. Fakheri, J.S. Moghaddas, Investigation of mixing time in a stirred tank equipped dual Rushton turbine, Iranian journal of Chemistry and Chemical Engineering, Vol. 31, No. 1, 89-100,  2012 (in Farsi).
  33. F. Fakheri, J.S. Moghaddas, R. Zadghaffari, Y. Moghaddas, Application of Central Composite Rotatable Design to Analysis of Mixing Time in Agitated Mechanically Vessel, Chemical Engineering & Technology, Vol. 35, No. 2, 353-361, 2012.
  34. A. Farbod, J.S. Moghaddas, CFD simulation and experimental investigation of a jet mixer: Effect of flow rate and jet angle on mixing time using the RSM model, Chemical engineering communication, accepted manuscript, 2012.
  35. R. Zadghaffari, J. S. Moghaddas, Z. Rahimiahar, Numerical Investigation of a Burner Configuration to Minimize Pollutant Emissions, APCBEE Procedia 3 (2012) 177 – 181, 2012.
  36. H. Bargozin, J.S. Moghaddas,Wettability alteration with silica aerogel nano-dispersion, Journal of Dispersion Science and Technology, Vol. 34 (8), 1130-1138, 2013.
  37. M. Taghavi, S. Ebrahimi, J.S. Moghaddas, Solid Particle Distribution in Centrifugal Impeller Contactors, Journal of Dispersion Science and Technology, accepted manuscript, 2013.
  38. H. Bargozin, J.S. Moghaddas, Stability of nanoporous Silica Aerogel dispersion as wettability alteration agent, Journal of Dispersion Science and Technology, Vol. 34 (10), 1454-1464, 2013.
  39. F. Fakheri, J.S. Moghaddas, Compartment mixing model in a stirred tank equipped dual Rushton turbine, Iranian Journal of Chemical Engineering, Vol. 9, No. 3, 2012.
  40. M. Akbari Aghdam, J.S. Moghaddas, M. Dabiri, The effect of the salinity of injected water and reservoir water on WAG injection: A study in an Iranian reservoir, Petroleum Science and Technology, 31, 2296-2303, 2013.
  41. M. Akbari Aghdam, J.S. Moghaddas, B. Moradi, An investigation of the effect of using foam in WAG injection in an Iranian oil reservoir, Petroleum Science and Technology, 31, 2228-2236, 2013.
  42. M. Akbari Aghdam, J.S. Moghaddas, B. Moradi, M. Dabiri, Maximizing the oil recovery through miscibile water alternating gas (WAG) injection in an Iranian oil reservoir, Petroleum Science and Technology, 31 (22), 2431 - 2440, 2013.
  43. A. Mohammadi, J.S. Moghaddas, An investigation of adsorption performance of Benzene and Ethyl Benzene over silica aerogel and carbon-silica aerogel composites, Journal of Separation Science and Engineering, Vol. 6, No. 2, 79 - 87, 2014.
  44. P. Noeparvar, J.S. Moghaddas, N. Jodeiri, H. Taleshi Ahangari, The effect of solvents on the conversion of oxidative coupling of 2-naphthol by reciprocating reactor, chemical technology, CTAIJ 9(4) , 128-133, 2014.
  45. T. Yousefi Amiri, J.S. Moghaddas, Performance evaluation of Cu-SiO2 aerogel catalysts in hydrogen production from methanol, Iranian Journal of Chemical Engineering, Volume 11, Number 3 (Summer), 2014.
  46. A. Mohammadi, J.S. Moghaddas, A. Aryamanesh, Residence time and concentration distribution in a Kenics KMX Static Mixer, Chemical Engineering Communication, Vol. 202(2), 144-150, 2015.
  47. A. Mohammadi, J.S. Moghaddas, Synthesis, adsorption and regeneration of silica aerogel and silica aerogel-activated carbon composites, Journal of Chemical Engineering Research and Design, 94, 475-484, 2015.
  48. T. Yousefi Amiri, J.S. Moghaddas, Cogeled copper-silica aerogel as a catalyst in hydrogen production from methanol steam reforming, International Journal of Hydrogen Energy, Volume 40, Issue 3, 21 January 2015, Pages 1472–1480.
  49. T. Yousefi Amiri, J.S. Moghaddas, Saeid Rahmani Khajeh, Silica aerogel-supported copper catalyst prepared via ambient pressure drying process, Journal of Sol-Gel Science and Technology(2016), 77:627–635, DOI 10.1007/s10971-015-3892-0.
  50. N. Yasrebi, J.S. Moghaddas, Studying the Effect of Humidity on Electrical Properties of Copper-Silica Aerogel, Iranian Journal of Chemical Engineering, Volume 12, Number 2 (Spring), 2015.
  51. H. Taleshi, J.S. Moghaddas, P.Noeparvar, An investigation on the mixing of the non-Newtonian fluids in stirred tanks by double impellers, The Chemical Technology: An Indian Journal, Trade Science Inc (TSI), 10 (3) 2015.
  52. T. Yousefi Amiri, J.S. Moghaddas, Reaction parameters influence on the catalytic performance of copper-silica aerogel in the methanol steam reforming, Journal of Fuel Chemistry and Technology, Vol. 43, No. 1, Jan. 2016.
  53. E. Rezaei, J.S. Moghaddas, Thermal conductivities of silica aerogel composite insulating material, Advanced Materials Letters, 2016, 7(4), 100-150.
  54. L. Amirkhani, J.S. Moghaddas, H. Jafarizadeh-Malmiri, Comparison of different methods for synthesis silica aerogel-iron oxide nanocomposites in ambient pressure condition, Solid State Sciences Journal, 2015.
  55. L. Amirkhani, J.S. Moghaddas, H. Jafarizadeh-Malmiri, Effect of surface modification agent and calcination process on the preparation of hydrophobic magnetic silica aerogel by ambient pressure drying method, Bulgarian chemical communication, Volume 47, Special Issue D (pp. 82 – 88) 2015.
  56. L. Amirkhani, J.S. Moghaddas, H. Jafarizadeh-Malmiri, Optimization of Candida rugosa lipase immobilization parameters on magnetic silica aerogel using adsorption method, Iranian Journal of Chemical Engineering, Volume 13, Issue 3, (Summer), 2016, 19-31.
  57. L. Amirkhani, J.S. Moghaddas, H. Jafarizadeh-Malmiri, Candida rugosa lipase immobilization on magnetic silica aerogel nanodispersion, RSC Advances, 2016, 6, 12676–12687.
  58. L. Amirkhani, J.S. Moghaddas, H. Jafarizadeh-Malmiri, Immobilization of Candida rugosa lipase on hydrophobic silica aerogel and its magnetic nanocomposite, Journal of Chemical Technology & Biotechnology, accepted, 2016.
  59. M. Firoozmandan, J.S. Moghaddas, N. Yasrebi, Performance of water glass based silica aerogel for adsorption of phenol from aqueous solution, Journal of Sol-Gel Science and Technology, Volume 79, Issue 1, pp 67-75, July 2016.
  60. H. Taleshi Ahangari, P. Noeparvar, J.S. Moghaddas, The effect of impeller type on the mixing time of the non-Newtonian fluids in stirred tanks, Chemical Technology: An Indian Journal, Volume 11, Issue 4, 2016.
  61. N. Nazeran, J.S. Moghaddas, Synthesis and characterization of silica aerogel/rigid polyurethane foam nanocomposites, Journal of Non-Crystalline Solids, Volume 461, 2017, 1–11.
  62. F, Fakheri, J. S.  Moghaddas, S. Fereidoni, H. Attar, Investigation of the effects of various parameters on mixing time in pilot stirred tank equipped single and dual rushton impeller, Indian Journal of Chemical Technology, Vol. 24, May 2017, pp. 344-351.
  63. L. Amirkhani, J. S. Moghaddas, H. Jafarizadeh, Optimization of Biodiesel Production using Immobilized Candida Rugosa Lipase on Magnetic Fe3O4-Silica Aerogel, Accepted, Iranian Journal of Chemistry and Chemical Engineering (IJCCE), Vol. 38, No. 2, pp. 193 – 201, 2019.
  64. S. Alasti, J.S. Moghaddas, M. Rezaei, In-situ synthesis of silica aerogel/polyurethane inorganic-organic hybrid nanocomposite foams: Characterization, cell microstructure and mechanical properties, Polymer 172, pp 27–40, 2019.
  65. J. S. Moghaddas, N. Yasrebi, S. A. Shojaosadati, M. Taghavi, An investigation and comparison of chemical engineering curriculum and teaching methods between Iranian and American universities, Journal of Engineering Education, 81(1), 19-44, 2019.
  66.  A. Mohammadi, J. S. Moghaddas, Experimental and Computational Study on Hydrodynamic of a Downscaled Mini Vessel USP Dissolution Test Apparatus II, Iranian Journal of Chemical Engineering, Vol. 16, No. 3 (Summer 2019), IAChE, 3-22, 2019.
  67. M.Taghavi, J. S. Moghaddas, Using PLIF/PIV Techniques to Investigate the Reactive Mixing in Stirred Tank Reactors with Rushton and Pitched Blade Turbines, Chemical Engineering Research and Design, 151, pp 190-206, 2019.
  68. M.Taghavi, J. S. Moghaddas, Flow Characteristics of the Rushton and Pitched Blade Turbines in Turbulent and Laminar Mixing, International Journal of Chemical Reactor Engineering, Volume 18: Issue 7, https://doi.org/10.1515/ijcre-2019-0215, 2020.
  69. A. Mohammadi, J. S. Moghaddas, Mesoporous tablet-shaped potato starch aerogels for loading and release of the poorly water-soluble drug celecoxib, Chinese Journal of Chemical Engineering, Volume 28, Issue 7, pp. 1778 - 1787, 2020.
  70. A. Mohammadi, J. S. Moghaddas, Mesoporous starch aerogels production as drug delivery matrices: synthesis optimization, ibuprofen loading, and release property, Turkish Journal of Chemistry, (2020) 44: 614 – 633, 2020.
  71. E. Tohfehghar, J. S. Moghaddas, Synthesis and characterization of waterglass-based silica aerogel under heat treatment for adsorption of nitrate from water: batch and column studies, Iranian Journal of Chemical Engineering, Vol. 16, No. 4 (Autumn 2019), IAChE, pp 53-72, 1999.
  72. M. Hosein Ahmadi, J.S., Moghaddas, E. Ataei, Investigating the operational parameters affecting the acid- base reaction inside the stirred tank by PIV/PLIF technique, Iranian Journal of Chemical Engineering, Vol. 19, No. 110 (Autumn 2020), IAChE, pp 6-18, 2020.
  73. M. H. Falsafi, M. Moghaddas, J. S. Moghaddas, Removal of heavy metals from synthetic wastewater using silica aerogel-activated carbon composite by adsorption method, Journal of Applied Research in Water and Wastewater 13 (2020), pp 90 – 96.
  74.  A. Mahmoodzadeh, J. S. Moghaddas, S. Jarolmasjed, A. Ebrahimi Kalan, M. Edalati, R. Salehi, Biodegradable cellulose-based superabsorbent as potent hemostatic agent, Chemical Engineering Journal 418 (2021) 129252, 2021.
  75. R. Sotoudeh Gharebagh, J. S. Moghaddas, Promoting Open and Innovative International Cooperation and Science Diplomacy, Journal of Iranian Chemical Engineering, Volume & Issue: Volume 20, Issue 117, November and December 2021.
  76. A. Jabbari, J.S. Moghaddas, H. Jafarizadeh, H. Hamishehkar, Ambient Pressure Drug Loading on Trimethylchlorosilane Silylated Silica Aerogel in Aspirin Controlled-Release System, Chemical Engineering Communication, https://doi.org/10.1080/00986445.2021.1989420, 2021.
  77. A. Jabbari, J.S. Moghaddas, H. Jafarizadeh, H. Hamishehkar, Carboxylic acid decorated silica aerogel nanostructure as drug delivery carrier, Microporous and Mesoporous Materials, Volume 323, August 2021, 111220, 2021.
  78. F. Sajedi, J.S. Moghaddas, Highly efficient hydrophilic silica aerogel for removal of Daunorubicin and Doxorubicin from synthetic pharmaceutical wastewater, Accepted in the journal of Separation Science and Technology, Volume 57, 2022 - Issue 13, https://doi.org/10.1080/01496395.2022.2027446.
  79. R. Sotoudeh Gharebagh, J. S. Moghaddas, Moving Forward to Improve Engineering Education at Undergraduate Level, Journal of Iranian Chemical Engineering, Volume & Issue: Volume 20, Issue 119, 2022.

 
 
مقالات کنفرانس ها:

  1. J.S. Moghaddas, C. Tragardh and K. Ostergren, Use of a simultaneous PLIF-PLIF technique to overcome optical problems in concentration measurements in two-phase bubbly systems, Advanced in Fluid Mechanics IV, WIT-Press, (2002).
  2. J.S. Moghaddas, S. Abdhu, K. Gasemzadeh and S. Fatehifar, Determining of Initial temperature and efficiency of petroleum coke production in thermal cracking process, The tenth Iranian national chemical engineering congress 15-17 November 2005 Zahedan – IRAN.
  3. A. Alizadeh Osaloo, J.S. Moghaddas, J.S. Soltan mohammadzadeh, Ethyl Benzene behavior in aerobic containers in industrial waste water units, The tenth Iranian national chemical engineering congress 15-17 November 2005 Zahedan – IRAN.
  4. S.A. Tabatabaei Nezhad, M.R. Rahimzadeh Mojarad, S.J. PaitakhtiOskuei, J.S. Moghaddas, Experimental Study of Water Alternating CO2 injection: Applicable in Secondary or Tertiary Stages? 1st Iranian Petroleum Engineering Congress (Iran Upstream 2006), May 30-31, 2006.
  5. S.A. Tabatabaei Nezhad, M.R. Rahimzadeh Mojarad, S.J. Paitakhti, J.S. Moghaddas, D. RezazadehFarahmand, Experimental Study on Applicability of Water Alternating CO2 injection in the Secondary and Tertiary Recovery, SPE 103988, accepted for oral presentation at the First International Oil Conference and Exhibition in Mexico, 31 August - 2 September 2006.
  6. R. Zadghaffari, J.S. Moghaddas, Y. Hajizadeh, Fuzzy corrosion modeling, new horizons, new opportunities, The 11th Iranian national chemical engineering congress 28-30 Octoberber 2006 Tehran – IRAN.
  7. R. Zadghaffari, J.S. Moghaddas, Study on multi-phase flow system with using of Modern optical techniques, The 11th Iranian national chemical engineering congress 28-30 Octoberber 2006 Tehran – IRAN.
  8. S. Ebrahimi, J.S. Moghaddas, M.K. Razavi, Pyrolysis Kinetic of Petroleum Residue by Thermal Analysis (Thermogravimetry), 11th Iranian national chemical engineering congress 28-30 Octoberber 2006 Tehran – IRAN.
  9. S. Ebrahimi, J.S. Moghaddas, Study of Effective Parameters in Better Feed Selection for Delayed Coking Process, 11th Iranian national chemical engineering congress 28-30 October 2006 Tehran – IRAN.
  10. B. Moshtari, A. Ghanji, J.S. Moghaddas, H. Bakhtiari, Experimental Study on Cold Flow in Slurry-Bubble Columns, The First National Specialty Conference on Gas, 30-31 October 2006,  Shiraz, Iran.
  11. S. Ebrahimi, J. S. Moghaddas, Investigation on Modern Flow Measurements Techniques, 6th Iranian national chemical engineering students’ congress September 2006, Isfahan, Iran.
  12. J.S. Moghaddas, J. Revstedt, C. Tragardh, Comparison of Mixing between Single and Bubbly two Phase Systems in Rushton Stirred Tank, Advances in Fluid Mechanics VII, WITpress, 2-6 July 2007, Prague, Czech Republic, Oral Presentation.
  13. B. Moshtari, J.S. Moghaddas, A. Ghanji, A Hydrodynamic Experimental Study of Slurry Bubble Column, Natural gas conversion VIII, Proceedings of the 8th Natural Gas Conversion Symposium, Natal, Brazil, May 27–31, 2007
  14. K. Shaiesteh, J.S. Moghaddas, Study of Solid Mixing, 17thIranian national food engineering congress 14-15 November 2007 Uromieh – IRAN.
  15. J.S. Moghaddas, J. Revstedt, C. Tragardh, Prediction of mixing time in a bubbly two-phase stirred tank by optical method, The 5th International Chemical Engineering Congress (IChEC 2008), Oral Presentation, 2-5 January, 2008, Kish Island, Iran.
  16. R. Zadghaffari, J.S. Moghaddas, A. Ahmadlouei Darab, J. Revstedt, CFD Simulation of Power and Mixing Time for Rushton Turbine in a Baffled-Tank Reactor, The 5th International Chemical Engineering Congress (IChEC 2008), Oral Presentation.
  17. A. Sadeghzadeh Nemavar, J.S. Moghaddas, A. Ahmadlouei Darab, E. Hiatimehr, Effects of Nozzle Diameter, Flow rates and Jet Angel on Mixing Time in a Jet Mixer, The 5th International Chemical Engineering Congress (IChEC 2008).
  18. B. Moshtari, A. Ghanji, J.S. Moghaddas, A Hydrodynamic Experimental Study of Slurry Bubble Column, The 5th International Chemical Engineering Congress (IChEC 2008).
  19. R. Zadghaffari, J.S. Moghaddas, Y. Hajizadeh, Fuzzy corrosion modeling new horizons, new opportunities, The 5th International Chemical Engineering Congress (IChEC 2008).
  20. R. Zadghaffari, J.S. Moghaddas, M. Ahmadlouy Darab, J. Revstedt, A Mixing Study in a Double-Rushton Stirred Tank, ACOMEN 2008.
  21. K. Shayesteh, J. Moghaddas, M. Haghighi, G. Imanzadeh, Mechanochemical solid state reaction oxidation coupling of beta-naphthole to binaphthole with FeCl3-6H2O using high speed vibration mill and investigation of  parameters effects it on the yield and reaction times, Chisa 2008, 24 - 28 August 2008, Praha, Czech Republic.
  22. K. Shayesteh, J. Moghaddas, Z. Nikghalb, Powder mixing and influence of solvent on mixture quality in the production ofamlodipin tablet, Chisa 2008, 24 - 28 August 2008, Praha, Czech Republic.
  23. A. SadeghzadehNemavar, J.S. Moghaddas, Effect of injection angle in jet-mixing ,The 12th Iranian national chemical engineering congress 20-23 October 2008 Tabriz – IRAN.
  24. H. Bargozin, J.S. Moghaddas, Designing of furnace for delayed coking pilot unit with quite uniform combustion model (complete mixing), The 12th Iranian national chemical engineering congress 20-23 October 2008 Tabriz – IRAN.
  25. H. Bargozin, J.S. Moghaddas, M.K. Razavi, Qualitative simulation of steam injection in tubes of delayed coking unit furnace, The 12th Iranian national chemical engineering congress 20-23 October 2008 Tabriz – IRAN.
  26. S. Saedi, J.S. Moghaddas, M. Amir Khosro, A review on fundamental liquid mixing-systems,  The 12th Iranian national chemical engineering congress 20-23 October 2008 Tabriz – IRAN.
  27. M. Maleki Kaklar, A. A. Babalou, J.S. Moghaddas, A. Aghaeineghad Meibodi, Flow modeling in cross flow tube-membrane (with transverse flow) using a new analytical method,The 12th Iranian national chemical engineering congress 20-23 October 2008 Tabriz – IRAN.
  28. K. Ghasemzadeh, J.S. Moghaddas, T. YousefiAmiri,Experimental investigation and producing of petroleum coke, The 12th Iranian national chemical engineering congress 20-23 October 2008 Tabriz – IRAN.
  29.  A. Farbod, J.S. Moghaddas, Perception of processing apparatuses in virtual space as a training method in chemical engineering, The 12th Iranian national chemical engineering congress 20-23 October 2008 Tabriz – IRAN.
  30. H. Barghozin, J.S. Moghaddas, M.M. Ahadian, Synthesis of Hydrophobic Nanoporous Silica Aerogels with a Fast and Cost Effective Method, 2nd International Congress On Nanoscience and Nanotechnology, 28-30 October 2008, Tabriz, Iran.
  31. H. Barghozin, J.S. Moghaddas, M.M. Ahadian, Adsorption of water pollutant using functionalized mesoporous silica aerogels: synthesis and adsorption properties, International Conference on "Advances in Wastewater Treatment and Reuse" (AWTR 2009), Iran (June 30- 2 July, 2009, University College of Engineering, University of Tehran).
  32. T. Yousefi Amiri, J. S. Moghaddas, A novel mixing approach in gas-liquid systems, The 6th International Chemical Engineering Congress (IChEC 2009), Oral Presentation, 16-20 November, 2009, Kish Island, Iran.
  33.  T. Yousefi Amiri, J. S. Moghaddas, Liquid phase mixing in a jet mixed gas-liquid system, The 6th International Chemical Engineering Congress (IChEC 2009), Oral Presentation, 16-20 November, 2009, Kish Island, Iran.
  34. M. Taghavi, J. S. Moghaddas, R. Zadghaffari, Study on Mixing Power Consumption in a Dual Rushton Stirred Tank, The 6th International Chemical Engineering Congress (IChEC 2009), 16-20 November, 2009, Kish Island, Iran.
  35. H. Bargozin, L. Amirkhani, J.S. Moghaddas, M.M. Ahadian, The effect of various solvents on physical properties of the ambient pressure dried silica aerogels, The 6th International Chemical Engineering Congress (IChEC 2009), 16-20 November, 2009, Kish Island, Iran.
  36. L. Feizy, A. Rahmani, J.S. Moghaddas, Thermodynamics Hydrate Inhibitors for Preventing of Gas Hydrates Formation in Gas Pipeline Transmission, The 6th International Chemical Engineering Congress (IChEC 2009), 16-20 November, 2009, Kish Island, Iran.
  37. K. Shayesteh, , J.S. Moghaddas, M. Haghighi, The concepts of Pharmaceutical Powder Mixing: the View point of Theory and Practice, The 6th International Chemical Engineering Congress (IChEC 2009), 16-20 November, 2009, Kish Island, Iran.
  38. K. Shayesteh,  J.S. Moghaddas, M. Haghighi, G. Imanzadeh,  Effect of vibration of reactor on oxidative coupling reaction of 2-naphthol in the solid state, The 6th International Chemical Engineering Congress (IChEC 2009), 16-20 November, 2009, Kish Island, Iran.
  39. K. Shayesteh, J.S. Moghaddas, M. Haghighi, G. Imanzadeh, Oxidative Coupling Reactions of Phenols in the Solid State Using the Vibration Mill, The 6th International Chemical Engineering Congress (IChEC 2009), 16-20 November, 2009, Kish Island, Iran.
  40. F. Fakheri, J.S. Moghaddas, R. Zadghaffari, Comparison between Planar Laser-induced fluorescence and Conductivity Probe techniques for measurement of Mixing Time in aerated dual Rushton stirred tank, The 6th International Chemical Engineering Congress (IChEC 2009), 16-20 November, 2009, Kish Island, Iran.
  41. R. Zadghaffari, J.S. Moghaddas, Evaluation of drag force effect on gas holdup in a Gas-liquid stirred tank reactor, The 6th International Chemical Engineering Congress (IChEC 2009), 16-20 November, 2009, Kish Island, Iran.
  42. M. Maleki Kakelar, A. Babalou, J.S. Moghaddas, A. Aghaeinejad Meybodi, E. Pipelzadeh, An analytical method for modeling the fluid flow in tubular membrane module,International Conference on "Advances in Wastewater Treatment and Reuse" (AWTR 2009), Iran (June 30- 2 July, 2009, University College of Engineering, University of Tehran).
  43. H. Bargozin, L. Amirkhani, J.S. Moghaddas, M.M. Ahadian, Synthesis and application of silica aerogel-MWCNT nanocomposites for adsorption of organic pollutants, the 3rd Conference on Nanostructures (NS2010), March 10-12, 2010, Kish Island, I.R. Iran.
  44. F. Fakheri, J.S. Moghaddas, Compartment mixing model in a stirred tank equipped dual Rushton turbine, The 13th  National Iranian Chemical Engineering Congress & The 1st Regional Oil & Chemical Engineering Congress (IChEC 13),  25-28 October 2010 Kermanshah – IRAN.
  45. F. Fakheri, J.S. Moghaddas, Experimental Design in a Rushton Mixing System, The 13th  National Iranian Chemical Engineering Congress & The 1st Regional Oil & Chemical Engineering Congress (IChEC 13),  25-28 October 2010 Kermanshah – IRAN.
  46. M. Taghavi, J.S. Moghaddas, Power Consumption and Flow Regime Transition in a Stirred Tank Reactor, The 13th  National Iranian Chemical Engineering Congress & The 1st Regional Oil & Chemical Engineering Congress (IChEC 13),  25-28 October 2010 Kermanshah – IRAN.
  47. S. Salek, R. Sotudeh-Gharabagh, J.S. Moghaddas, Modeling and optimization the natural gas storage in absorbent, The 13th  National Iranian Chemical Engineering Congress & The 1st Regional Oil & Chemical Engineering Congress (IChEC 13),  25-28 October 2010 Kermanshah – IRAN.
  48. A. Ansari, J.S. Moghaddas, Effect of aeration on mixing time in stirred tanks using dual PBTU30 impeller, The 13th  National Iranian Chemical Engineering Congress & The 1st Regional Oil & Chemical Engineering Congress (IChEC 13),  25-28 October 2010 Kermanshah – IRAN.
  49.  A. Farbod, J.S. Moghaddas, R. Zadghaffari, M. Shokrozar, CFD simulation and experimental investigation of a jet mixer: Effect of flow rate and jet angle on mixing time using the RSM model, The 13th  National Iranian Chemical Engineering Congress & The 1st Regional Oil & Chemical Engineering Congress (IChEC 13),  25-28 October 2010 Kermanshah – IRAN.
  50. M. Shokrozar, J.S. Moghaddas, R. Zadghaffari, A. Farbod, Investigation of different interface location in Sliding mesh method and their effect on simulation of baffled stirred tank with 6 blades rushtonturbin, The 13th  National Iranian Chemical Engineering Congress & The 1st Regional Oil & Chemical Engineering Congress (IChEC 13) ,  25-28 October 2010 Kermanshah – IRAN.
  51. M. Shokrozar, J.S. Moghaddas, R. Zadghaffari, A. Farbod, Investigation of different turbulent models in simulation of baffled stirred tank with 6 blades rushtonturbin, The 13th  National Iranian Chemical Engineering Congress & The 1st Regional Oil & Chemical Engineering Congress (IChEC 13) ,  25-28 October 2010 Kermanshah – IRAN.
  52. M. Shokrozar, J.S. Moghaddas, R. Zadghaffari, A. Farbod, Investigation of different turbulent models in simulation of baffled stirred tank with 6 blades rushton turbin, The 13th  National Iranian Chemical Engineering Congress & The 1st Regional Oil & Chemical Engineering Congress (IChEC 13) ,  25-28 October 2010 Kermanshah – IRAN.
  53. H. Bargozin, L. Amirkhani, J. S. Moghaddas, M. M. Ahadian, M. Karimi, Wettability Alteration of Sandstone Core by Nanostructured Silica Aerogels , The 13th  National Iranian Chemical Engineering Congress & The 1st Regional Oil & Chemical Engineering Congress (IChEC 13) ,  25-28 October 2010 Kermanshah – IRAN.
  54. H. Bargozin, L. Amirkhani, J. S. Moghaddas, M. M. Ahadian, Synthesis of nanoposous silica aerogel composites for removal of BTX compounds from water, The 13th  National Iranian Chemical Engineering Congress & The 1st Regional Oil & Chemical Engineering Congress (IChEC 13),  25-28 October 2010 Kermanshah – IRAN.
  55. M. Ghovvati, H. Bargozin, J.S. Moghaddas, M.R. Hataminia, Potential of amino-functionalized silica aerogels for removal of Cu(II) from aqueous, The 13th  National Iranian Chemical Engineering Congress & The 1st Regional Oil & Chemical Engineering Congress (IChEC 13),  25-28 October 2010 Kermanshah – IRAN.
  56. M.R. Hataminia, H. Bargozin, J.S. Moghaddas, M. Ghovvati, Adsorption of toluene vapor with nanoporous silica aerogels, The 13th  National Iranian Chemical Engineering Congress & The 1st Regional Oil & Chemical Engineering Congress (IChEC 13),  25-28 October 2010 Kermanshah – IRAN.
  57. J. Eghbali, J. S. Moghaddas, A study on mixing time of non-Newtonian fluids in a stirred tank, The 7th International Chemical Engineering Congress & Exhibition (IChEC 2011) Kish, Iran, 21-24 November, 2011.
  58. M. R. Hataminia, H. Bargozin, J. S. Moghaddas, Nanoporous silica aerogels as adsorbent to remove para xylene vapors from waste gas streams, The 7th International Chemical Engineering Congress & Exhibition (IChEC 2011) Kish, Iran, 21-24 November, 2011.
  59. M. Firoozmandan, H. Bargozin, L. Amirkhani, J. S. Moghaddas, Adsorption of phenol with silica aerogel-carbon active nanocomposites, The 7th International Chemical Engineering Congress & Exhibition (IChEC 2011) Kish, Iran, 21-24 November, 2011.
  60. H. Bargozin, J.S. Moghaddas, Potential assessment of silica aerogels nanosuspensions for wettability alteration, The 7th International Chemical Engineering Congress & Exhibition (IChEC 2011) Kish, Iran, 21-24 November, 2011.
  61. H. Bargozin, L. Amirkhani, J.S. Moghaddas*, F. Abdollahi, Optimisition of synthesis parameters for cost effective production  of hydrophobic silica aerogels, The 7th International Chemical Engineering Congress & Exhibition (IChEC 2011)Kish, Iran, 21-24 November, 2011.
  62. M. Taghavi, S. Ebrahim, J.S. Moghaddas and S. Pouresmail, Effects of impeller system on the solids distribution in a stirred tank, The 7th International Chemical Engineering Congress & Exhibition (IChEC 2011) Kish, Iran, 21-24 November, 2011.
  63. A. Mohammadi, J. S. Moghaddas, تعیین ظرفیت اشباع تعادلی و ضریب نفوذ بنزن در فرآیند جذب سطحی بر روی سیلیکاائروژل, The 14th Iranian national chemical engineering congress16-18 October 2012 Tehran – IRAN.
  64. A. Mohammadi, J. S. Moghaddas, تعیین ظرفیت اشباع تعادلی و ضریب نفوذ اتیل­بنزن در فرآیند جذب سطحی بر روی سیلیکاائروژل, The 14th Iranian national chemical engineering congress16-18 October 2012 Tehran – IRAN.
  65. P. Noeparvar, J.S. Moghaddas, N. Jodeiri, بررسی اثر افزودن حلال­های آب و کلروفرم به واکنش جفت شدن اکسایشی 2-نفتول در راکتور رفت و برگشتی , The 14th Iranian national chemical engineering congress16-18 October 2012 Tehran – IRAN.
  66. P. Noeparvar, J.S. Moghaddas, N. Jodeiri,  بررسی اثر حلال­های دارای اتم کلر بر بازده 1و'1-2- بای- نفتول در راکتور رفت و برگشتی, The 14th Iranian national chemical engineering congress16-18 October 2012 Tehran – IRAN.
  67. H. Taleshi, J.S. Moghaddas, زمان اختلاط سیالات غیرنیوتونی در مخازن همزن­دار تک پره­ای با استفاده از پره­های مقعر , The 14th Iranian national chemical engineering congress16-18 October 2012 Tehran – IRAN.
  68. H. Taleshi, J.S. Moghaddas, D. Kahfrooshan, توزیع زمان ماند برای سیستم دو فازی در استاتیک میکسر کنیکس, The 14th Iranian national chemical engineering congress 16-18 October 2012 Tehran – IRAN.
  69. L. Amirkhani, J. S. Moghaddas, استفاده از مایعات یونی در سنتز ائروژلها به جای حلالهای معمول, The 14th Iranian national chemical engineering congress 16-18 October 2012 Tehran – IRAN.
  70. L. Amirkhani, J. S. Moghaddas, روشهای سنتز کامپوزیت های سیلیکا ائروژل اکسید فلزات، فلزات  و آلیاژها و انواع آنها,The 14th Iranian national chemical engineering congress 16-18 October 2012 Tehran – IRAN.
  71. A. Aryamanesh, J. S. Moghaddas ,توزیع زمان ماند برای سیستم دو فازی در استاتیک میکسر کنیکس, The 14th Iranian national chemical engineering congress 16-18 October 2012 Tehran – IRAN.
  72. N. Yasrebi, J. S. Moghaddas, Humidity sensing properties of copper-silica aerogel, The 8 th international chemical engineering congress & Exhibition, 24-27, February, 2014.
  73.  A. Akram, J. S.  Moghaddas, Study on the effect of impeller speed on mixing time by the colorimetric method, The 8 th international chemical engineering congress & Exhibition, 24-27, February, 2014.
  74. S. Peyghami Partan, J. S. Moghaddas, The effect of the tracer and rotary speed on the time of liquid circulation in a stirred tank equipped with a Rushton turbine, The 8 th international chemical engineering congress & Exhibition, 24-27, February, 2014.
  75. S. Peyghami Partan, J. S. Moghaddas, The effect of gas phase on circulation time of the liquid in a stirred tank equipped with Rushton turbine agitator, The 8 th international chemical engineering congress & Exhibition, 24-27, February, 2014.
  76. H. Safaei Asli, J.S. Moghaddas, Comparison of the efficiency of a jet mixer and a stirred tank, The 8 th international chemical engineering congress & Exhibition, 24-27, February, 2014.
  77. M. Shokrgozar, J.S. Moghaddas, A. Farbod, Investigation of various side injection points’ effect on mixing time in a two Rushton blade impeller stirred tank, The 8 th international chemical engineering congress & Exhibition, 24-27, February, 2014.
  78. E. Rezaeia, J. S. Moghaddas, Thermal and hydrophobicity properties of flexible cotton/ silica aerogel composites,  5th International Congress on Nanoscience & Nanotechnology (ICNN2014) 22-24 October 2014, Tehran, Iran.
  79. E. Jalili, J. S. Moghaddas, Effect of the calcination temperature on humidity sensing properties of silica aerogel thin films,  5th International Congress on Nanoscience & Nanotechnology (ICNN2014) 22-24 October 2014, Tehran, Iran.
  80. S. Bayat, J. S. Moghaddas, تاثیر فرکانس و زمان واکنش بر بازدهی سنتز 3،3´– بیس ایندولیل (4- کلرو فنیل) متان در راکتور رفت و برگشتی سرعت بالا,  , The 15th Iranian national chemical engineering congress 17-19 February 2015 Tehran – IRAN.
  81. S. Bayat, J. S. Moghaddas, سنتز 3،3´– بیس ایندولیل (4- کلرو فنیل) متان در راکتور رفت و برگشتی سرعت بالا  , The 15th Iranian national chemical engineering congress 17-19 February 2015 Tehran – IRAN.
  82. S. Bayat, J. S. Moghaddas, سنتز 3،3´– بیس ایندولیل (4- کلرو فنیل) متان در راکتور رفت و برگشتی سرعت بالا  , The 15th Iranian national chemical engineering congress 17-19 February 2015 Tehran – IRAN.
  83. E. Rezaei, J. S. Moghaddas, بررسی خواص آب­گریزی و ضریب هدایت حرارتی عایق کامپوزیتی سیلیکا ائروژل- پنبه, The 15th Iranian national chemical engineering congress 17-19 February 2015 Tehran – IRAN.
  84. E. Rezaei, J. S. Moghaddas, Thermal conductivities of silica aerogel composite insulating material, Advanced Material World Congress, 23-26 August, 2015, Stockholm, Sweden.
  85. A. Mohammadi, J. S. Moghaddas, Adsorption-Desorption cycles of Silica aerogel and Silica aerogel-activated carbon composite, Advanced Material World Congress, 23-26 August, 2015, Stockholm, Sweden.
  86. Mahsa Taghavi, Jafarsadegh Moghaddas, Flow Visualization in a Rushton Turbine Stirred Tank by the PLIF and PIV Techniques, The 9th International Chemical Engineering Congress & Exhibition (IChEC 2015), Shiraz, Iran, 26-28 December, 2015.
  87. Farzan Sobhani, Jafarsadegh Moghaddas, Analysis of flow pattern in the stirred tanks by using image processing method, The 9th International Chemical Engineering Congress & Exhibition (IChEC 2015), Shiraz, Iran, 26-28 December, 2015.
  88. Afsaneh Ahanchi, Jafarsadegh Moghaddas, An investigation of Mixing Of Non- Newtonian Fluid in a Kenics Static Mixer by Image Processing, The 9th International Chemical Engineering Congress & Exhibition (IChEC 2015), Shiraz, Iran, 26-28 December, 2015.
  89. Afsaneh Ahanchi, Jafarsadegh Moghaddas, Experimental Study of Mixing in a Kenics Static Mixer by Colorimetric, The 9th International Chemical Engineering Congress & Exhibition (IChEC 2015), Shiraz, Iran, 26-28 December, 2015.
  90. Roya Kamyar, Jafarsadegh Moghaddas, Planar Laser-Induced Fluorescence Method for Investigation of Mixing Time in a Stirred Tank, The 9th International Chemical Engineering Congress & Exhibition (IChEC 2015), Shiraz, Iran, 26-28 December, 2015.
  91. Roya Kamyar, Jafarsadegh Moghaddas, Maryam Hejazi, Investigation of flow pattern in a stirred tank by PIV technique, The 9th International Chemical Engineering Congress & Exhibition (IChEC 2015), Shiraz, Iran, 26-28 December, 2015.
  92. N. Yasrebi, J. S. Moghaddas, بررسی خواص نانو کامپوزیت مس سیلیکا ائروژل در اندازه گیری رطوبت , 2nd International Conference on New Research Achievements in Chemistry@ Chemical Engineering, Amirkabir University, Tehran, Iran, 2016.
  93. A. Ansari, J. S. Moghaddas, Effects of Rushton impeller combination to Pitched Blade Turbine impellers on mixing time in stirred tanks, 3rd. International Conference on Engineering and Applied Science, Frankfurt University, Germany, 14th September 2016.
  94. M. Hejazi, J. S. Moghaddas, R. Sotudeh-Gharebagh, Fenton reaction in an immiscible liquid-liquid reactors using planer laser induced fluorescence signature, The16th Iranian National Congress of Chemical Engineering, Tehran, , Jan 22-24, 2019.
  95. S. Alasti, J. S. Moghaddas, M. Rezaei, مطالعه تاثیر کلسیناسیون سیلیکاائروژل بر روی سنتز فوم نانوکامپوزیتی سیلیکاائروژل/پلی یورتان, The16th Iranian National Congress of Chemical Engineering, Tehran, , Jan 22-24, 2019.
  96. S. Alasti, J. S. Moghaddas, M. Rezaei, مطالعه تاثیر اختلاط سیلیکاائروژل آب¬گریز در دی ایزوسیانات و پلی ال برروی ساختار فوم نانوکامپوزیتی پلی یورتان/سیلیکاائروژل, The16th Iranian National Congress of Chemical Engineering, Tehran, , Jan 22-24, 2019.
  97.  
 

 
اختراعات ثبت شده:

  1. ساخت سيستم توليد پتروليوم کک مرغوب
  2. ساخت سيستم کنترل دستگاه توليد پتروليوم کک
  3. توليد پتروليوم کک مرغوب و بررسی سنتيک آن
  4. ساخت ائروژلهای سیلیکایی نانو متخلخل و نانو کامپوزیت های آن ها با قابلیت کاربرد در صنایع مختلف
  5. نانو کاتالیست – مس سیلیکا ایروژل برای تولید هیدروژن از فرایند ریفرمینگ متانول با بخار آب – 1393
  6. ابر جاذب پایه سلولزی بند آورنده خونریزی های شدید - 1399

 
پایان نامه های دکتری:
استاد راهنما:

  1. رامین زادغفاری- 1389
  2. کیوان شایسته- 1389
  3. حسن برگزین- 1391
  4. طاهر یوسفی امیری- 1394
  5. لیلا امیرخانی- 1395
  6. سهیل الستی- 1398
  7. اکبر محمدی – 1399
  8. مهسا تقوی- 1399
  9. آسیه جباری – 1400
  10.  مریم حجازی – در حال حاضر
  11. نعیمه یثربی – در حال حاضر
  12. مریم ضرغامی – در حال حاضر
  13. سوری – در حال حاضر

 
 
پایان نامه های کارشناسی ارشد:
استاد راهنما:

  1.  سمیه ابراهیمی- 1385
  2.  بهنوش مشتری- 1385
  3.  حسن برگزین- 1386
  4.  علی صادق زاده- 1386
  5.  طاهر یوسفی امیری- 1387
  6.  فیروز فاخری- 1387
  7.  مریم پاکمهر- 1388
  8.  لیلا امیرخانی- 1388
  9.  مصطفی شکرگزار- 1389
  10. لیلا فیضی- 1389
  11. علی فربد- 1389
  12. سمیه عبدالهی- 1389
  13. امین رضا انصاری- 1389
  14. زهرا هوشیار- 1390
  15. محبت فیروزمندان- 1390
  16. جواد اقبالی- 1390
  17. هانی تالشی آهنگری- 1391
  18. محمد فرید باقری- 1391
  19. پریا نوپرور- 1391
  20. رویا گودرزی- 1391
  21. اکبر محمدی- 1391
  22. آرمان آریامنش- 1391
  23. سهیل الستی- 1392
  24. نعیمه یثربی- 1392
  25. علي پیغامی- 1392
  26. امیرعباس اکرم- 1392
  27. هانی صفائی- 1392
  28. احسان رضایی – 1393
  29.  احسان جلیلی – 1393
  30.  ساره بیات – 1393
  31.  سعیده مریدی – 1393
  32.  زهرا عبادی – 1393
  33.  رویا کامیار – 1394
  34.  افسانه آهنچی – 1394
  35.  فرزان سبحانی – 1394
  36. ثمانه حبیب نیا – 1394
  37.  نسترن ناظران – 1394
  38. صادق هاشم زاده – 1394
  39.  الیما هاشمی – 1394
  40. الهام تحفه گر – 1395
  41. سوسن حمزه راد – 1395
  42.  فرهاد مهاجران – 1395
  43.  احمد بنادری – 1395
  44.  نغمه مسرت – 1395
  45. ابوالفضل دبیر مایانی- 1396
  46. میر اسماعیل میر علی زاده – 1396
  47. محمد حسام فلسفی– 1396
  48. ابراهیم اژدر– 1396
  49. بهزاد زحمتکش– 1396
  50. محمد حسین احمدی - 1396
  51. نویده سیدیان – 1397
  52. اوین عطایی – 1397
  53. مینا پرویزی – 1397
  54. مینا بهروزی – 1397
  55. احمد محمودزاده – 1398
  56. سمیرا امیرزاده – 1398
  57. فردوس ساجدی – 1399
  58. سینا رمضانیان – 1400
  59. حسن عابدپور – 1400
  60. رضا خانی - 1399
  61. مهدی طاهری – 1399
  62. زهرا فرهی – 1399
  63. ابراهیم خلیلی - 1399

 
 
تدوین استانداردهای ملی:

  • ریاست کمیسیون فنی تدوین استاندارد ملی شماره 16496 «لوله های مسی بدون درز- مورد استفاده در خدمات تهویه مطبوع و تبرید- ویژگی ها»
  • عضو کمیسیون فنی تدوین استاندارد ملی «تایل آکوستیک از جنس مواد معدنی (سقف کاذب)- ویژگی ها
  • دبیر کمیسیون فنی تدوین استاندارد ملی «پوشش های فلزی- روش های آزمون برای پوشش های الکتروترسیبی طلا و آلیاژ طلا- قسمت 3: آزمون الکتروگرافی برای تخلخل»
  • عضو کمیسیون فنی تدوین استاندارد ملی «الوار چوب پنبه بکر، تمیز، تکه ها و پسماندهای چوب پنبه- نمونه برداری برای اندازه گیری مقدار رطوبت»
  • عضو کمیسیون فنی تدوین استاندارد ملی به شماره 7216-12 "بیولوژیکی وسایل پزشک- قسمت 12- آماده سازی نمونه و مواد مرجع"
  • عضو کمیسیون فنی تدوین استاندارد ملی به شماره 17461 " طرح کیفیت مشتری محور و مبتنی بر سیستم برای سازندگان –راهنما"
  • عضو کمیسیون فنی تدوین استاندارد ملی به شماره 17462-2 " استقرار کنترل فرایند آماری (spc) قسمت2- کاتالوگ ابزارها و تکنیک ها –راهنما"
  • عضو کمیسیون فنی تدوین استاندارد ملی به شماره 17463 " ارزیابی انطباق -استفاده از سیستم های -مدیریت -اصول و الزامات"
  • عضو کمیسیون فنی تدوین استاندارد ملی به شماره 17464 " مدیریت کیفیت -رضایت مشتری -تراکنش های تجارت الکترونیکی B2C- خطوط راهنما"
  • عضو کمیسیون فنی تدوین استاندارد ملی به شماره 17465 " مدیریت پروژه –راهنما"
  • عضو کمیسیون فنی تدوین استاندارد ملی به شماره 17466 " ارزیابی انطباق -شکایت ها و درخواست های رسیدگی مجدد-اصول و الزامات"
  • عضو کمیسیون فنی تدوین استاندارد ملی به شماره 17467 " ارزیابی انطباق -محرمانگی -اصول و الزامات"
  • عضو کمیسیون فنی تدوین استاندارد ملی به شماره 17468 " ارزیابی انطباق -افشای اطلاعات -اصول و الزامات"
  • عضو کمیسیون فنی تدوین استاندارد ملی به شماره 18182 " محصولات کمکی برای افراد کم توان -الزامات عمومی و روشهای آزمون"
  • عضو کمیسیون فنی تدوین استاندارد ملی به شماره 18184 " سیستم های آزمون تشخیصی برون تنی -سیستم های پایش گلوکز خون برای خود آزمایی در کنترل دیابت ملیتوس – الزامات"
  • عضو کمیسیون فنی تدوین استاندارد ملی به شماره 1403 " پروفیلهای پلی وینیل کلراید سخت برای ساخت درب و پنجره – تعیین مقاومت پروفیل اصلی به ضربه با سقوط وزنه – روش آزمون"
       
 
صفحه اصلی | وب سایت دانشگاه صنعتی سهند | تماس با ما
دانشگاه صنعتی سهند ، دانشکده مهندسی شیمی - صندوق پستی: 1996-51335 | دفتر دانشکده مهندسی شیمی: 33459152-041 | info.che@sut.ac.ir